Open StarLink Charger 3.0 with two compatible hearing aids seated.

Starkey StarLink Charger 3.0

Laden Sie kompatible Starkey Hörgeräte an einer Steckdose mit Stromversorgung auf und bewahren Sie sie zur Aufbewahrung im selben Etui auf.

Was StarLink Charger 3.0 kann

Dieses Etui mit Deckel lädt zwei kompatible Starkey Hörgeräte auf und bietet Ihnen einen Aufbewahrungsort dafür. Das Ladegerät benötigt während des gesamten Ladevorgangs externe Stromversorgung. Wenn der Akku eines kompatiblen Hörgeräts schwach ist, sagt Starkey, dass zehn Minuten Turbo Charge etwa drei Stunden Nutzung ermöglichen können.

Which hearing aids work with Starkey StarLink Charger 3.0?

Laden

  • Starkey Omega AI+ mRIC R

    Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging. Match the mRIC R variant on the bottom of the case.

  • Starkey Omega AI+ RIC RT

    Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging. Match the RIC R/RT variant on the bottom of the case.

  • Starkey Edge AI RIC RT

    Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging. Match the RIC R/RT variant on the bottom of the case.

  • Starkey Edge AI mRIC R

    Edge AI mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging. Match the mRIC R variant on the bottom of the case.

Wählen Sie das genaue Modell auf Ihren Hörgeräten oder Unterlagen. Ein Treffer für eine Produktfamilie belegt nicht die Unterstützung jedes Modells dieser Familie.

Was möchten Sie tun?
Dokumentierte Geräte und Konfigurationen anzeigen
  • Starkey Omega AI+ mRIC R · Genaues Modell

    Version marked mRIC R · Laden

    Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    Zusätzliche Einrichtung erforderlich

    Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    • Match the mRIC R variant on the bottom of the case.
    Quelle · 2026-11-18
  • Starkey Omega AI+ RIC RT · Genaues Modell

    Version marked RIC R/RT · Laden

    Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    Zusätzliche Einrichtung erforderlich

    Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    • Match the RIC R/RT variant on the bottom of the case.
    Quelle · 2026-11-18
  • Starkey Edge AI RIC RT · Genaues Modell

    Version marked RIC R/RT · Laden

    Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    Zusätzliche Einrichtung erforderlich

    Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    • Match the RIC R/RT variant on the bottom of the case.
    Quelle · 2026-11-18
  • Starkey Edge AI mRIC R · Genaues Modell

    Version marked mRIC R · Laden

    Edge AI mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    Zusätzliche Einrichtung erforderlich

    Edge AI mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    • Match the mRIC R variant on the bottom of the case.
    Quelle · 2026-11-18

Dokumentierte Funktionen

Power and charging

Automatic hearing-aid power
Compatible aids turn off when seated in the powered case and turn back on when removed. They can power on inside the case if it loses power.Dokumentation · 2026-11-18
Unpowered storage behavior
Aids can power on inside the case when it has no power source. Starkey says leaving the aids in the powered charger will not overcharge them.Dokumentation · 2026-11-18
Hearing-aid and receiver fit
The Omega AI+ mRIC R needs the mRIC R version and the RIC RT needs the RIC R/RT version. Verify the style label on the bottom of the case.Dokumentation · 2026-11-18
Charging indicators
Each side light confirms placement, flashes during charging and stays lit when full.Dokumentation · 2026-11-18
Charging slots
2 aids

Separate left and right wells are shown in the manufacturer’s diagrams.

Dokumentation · 2026-11-18
Full hearing-aid charge time
3,5 Stunden

Starkey’s 3.0 QuickTIP gives the figure for compatible rechargeable hearing aids. It does not specify individual model or remaining charge.

Dokumentation · 2026-11-18
Lid behavior while charging
Charging can occur open or closed, but Starkey recommends closing the lid so its silicone insert keeps the hearing aids seated.Dokumentation · 2026-11-18
Laden nur mit externer Stromversorgung

This version has no onboard battery. Keep the charger connected to external power.

Dokumentation · 2026-11-18
Quick charge duration
10 Minuten

Turbo Charge starts automatically when the hearing-aid battery is low.

Dokumentation · 2026-11-18
Runtime after quick charge
About 3 hours after a 10-minute Turbo ChargeDokumentation · 2026-11-18

Design and everyday use

Regional variants
U.S. commercial codes P00014590 (mRIC R) or P00014591 (RIC R/RT). November 2026 Government Services codes P00014661 or P00014662.

The Government Services order guide is a distinct channel. Match the physical fit and current supplier code.

Dokumentation · 2026-11-18
Required extras
External power source while charging, Case version marked for the exact hearing-aid styleDokumentation · 2026-11-18
Status indicators
Left and right hearing-aid lights

Both sides blink during charging and stay on when full. See case battery lights for the Premium model.

Dokumentation · 2026-11-18

How to set up Starkey StarLink Charger 3.0

Prüfen Sie das Etikett auf der Unterseite auf die Hörgeräte-Bauform. Schließen Sie das Etui an eine externe Stromversorgung an. Setzen Sie jedes Hörgerät in den passenden Steckplatz und schließen Sie den Deckel. Die beiden seitlichen Leuchten blinken, während die Hörgeräte laden, und leuchten dauerhaft, wenn sie vollständig geladen sind.

Vor dem Kauf prüfen

Use the marked case for your exact mRIC R or RIC R/RT hearing aid. Some similar-looking hearing aids use a different charger. Aids can turn on in an unpowered case.

Match the charger to your hearing aid

Choose the version marked for your exact rechargeable receiver-in-canal style. The mRIC R and RIC R/RT cases have different charging wells. The commercial order numbers are P00014590 (mRIC R) or P00014591 (RIC R/RT).

Quelle

Read the lights while charging

Prüfen Sie das Etikett auf der Unterseite auf die Hörgeräte-Bauform. Schließen Sie das Etui an eine externe Stromversorgung an. Setzen Sie jedes Hörgerät in den passenden Steckplatz und schließen Sie den Deckel. Die beiden seitlichen Leuchten blinken, während die Hörgeräte laden, und leuchten dauerhaft, wenn sie vollständig geladen sind.

Quelle

Needs a power source every time you charge

If you’re choosing between the two Starkey 3.0 cases, both offer Turbo Charge and both come in mRIC R and RIC R/RT sizes. The difference for travel is power. This case needs an external supply, while the StarLink Premium Charger 3.0 can recharge the aids from its own battery.

Quelle

Verwandtes Zubehör

Weitere in der Dokumentation genannte Geräte

Diese Namen wurden noch keinem genauen Gerät in unserem Katalog zugeordnet. Sie erzeugen daher keine bestätigten Treffer in der Suche.

Aktuelle Angebote werden geprüft…

Dokumentation geprüft am 18. Nov. 2026