Allure Standard Charger holding one Widex Allure receiver-in-canal hearing aid.

Widex Standard Charger

Laden Sie zwei kompatible Widex Allure Hörgeräte in einer offenen Desktop-Dockingstation auf.

Was Standard Charger kann

Der WPT301 Standard Charger verfügt über zwei offene Ladeschächte und separate Fortschrittsleuchten für jedes Hörgerät. Die kompakte Dockingstation wird über USB-C mit Strom versorgt. Ein vollständig geladenes Hörgerät kann in seinem Schacht bleiben, während das andere weitergeladen wird.

Which hearing aids work with Widex Standard Charger?

Laden

  • Widex Allure RIC R D

    Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.

  • Widex Allure BTE R D

    Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.

Wählen Sie das genaue Modell auf Ihren Hörgeräten oder Unterlagen. Ein Treffer für eine Produktfamilie belegt nicht die Unterstützung jedes Modells dieser Familie.

Was möchten Sie tun?
Dokumentierte Geräte und Konfigurationen anzeigen
  • Widex Allure RIC R D · Genaues Modell

    Allure ARRD1 RIC fit · Laden

    Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.

    Zusätzliche Einrichtung erforderlich

    Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.

    • Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.
    Quelle · 2026-11-18
  • Widex Allure BTE R D · Genaues Modell

    Allure ABRD1 BTE fit · Laden

    Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.

    Zusätzliche Einrichtung erforderlich

    Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.

    • Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.
    Quelle · 2026-11-18
  • Widex Allure ITE R D · Genaues Modell

    Allure ACRD1 ITE has separate WPT501 · Laden

    Allure ITE R D is listed under the separate WPT501.

    Als inkompatibel dokumentiert
    Quelle · 2026-11-18

Dokumentierte Funktionen

Power and charging

Automatic hearing-aid power
The hearing aids switch off when seated for charging and switch on after removal.Dokumentation · 2026-11-18
Hearing-aid and receiver fit
Allure RIC R D (ARRD1) and Allure BTE R D (ABRD1). Allure ITE R D has a separate WPT501 dock.Dokumentation · 2026-11-18
Charging indicators
Three steady green lights mean the associated hearing aid is fully charged. Mixed pulsing and steady green lights show progress in thirds.Dokumentation · 2026-11-18
Charging method
Fitted drop-in wells. Model WPT301 radio operates at 6.78 MHz. Exact coupling method is not named in the guide.Dokumentation · 2026-11-18
Charging slots
2 aidsDokumentation · 2026-11-18
Charging temperature limits
Amber indicators show charging paused due to the hearing aid’s temperature. Wait for the temperature to return to the allowable range.Dokumentation · 2026-11-18
Full hearing-aid charge time
4 Stunden

About four hours for Allure RIC R D.

Konfiguration: Allure ARRD1 RIC fit

Dokumentation · 2026-11-18
Full hearing-aid charge time
4,5 Stunden

About 4.5 hours for Allure BTE R D in the model-specific sheet.

Konfiguration: Allure ABRD1 BTE fit

Dokumentation · 2026-11-18
Electrical input requirements
5 V DC at 500 mA. Manufacturer requires the supplied cable and a suitable power adapter with USB-A socket.Dokumentation · 2026-11-18
Laden nur mit externer Stromversorgung

Requires an external power source. This dock has no built-in power bank.

Dokumentation · 2026-11-18
Power bank use
The manufacturer’s setup precautions explicitly apply to charging with an external power bank. Use the approved cable and compatible power supply.Dokumentation · 2026-11-18
Power connector
USB-C at the charger. Use the supplied USB cable.Dokumentation · 2026-11-18
Quick charge duration
30 MinutenDokumentation · 2026-11-18
Runtime after quick charge
4 Stunden

Approximately four hours of use after 30 minutes of charge per the exact charger guide. The guide does not specify a streaming duty cycle.

Dokumentation · 2026-11-18
USB-C power input
UnterstütztDokumentation · 2026-11-18

Care and fit

Keine Trocknungsfunktion

Widex lists integrated drying on Charge n Clean separately.

Dokumentation · 2026-11-18
Kein UV-Reinigungszyklus

Widex lists integrated UV-C on Charge n Clean separately.

Dokumentation · 2026-11-18

Design and everyday use

Control accessibility
The charge indicator lights are grouped separately for the left and right wells.Dokumentation · 2026-11-18
Dimensions
62 × 44 × 42 mm, width × height × depth.Dokumentation · 2026-11-18
Included items
Charger, Supplied USB cableDokumentation · 2026-11-18
Routine maintenance
Unplug, then wipe the charger with a soft dry cloth. Keep the wells free of dust.Dokumentation · 2026-11-18
Operating conditions
Indoor use, 32–86 °F (0–30 °C) and 10–95% relative humidity.Dokumentation · 2026-11-18
Physische Bedienelemente
Charging wells, Status indicator banksDokumentation · 2026-11-18
Regional variants
WPT301 for Allure RIC and BTE. Norwegian Allure RIC parts list 21023446. Other regional kit numbers differ.Dokumentation · 2026-11-18
Required extras
Compatible Allure RIC or BTE hearing aids, Appropriate USB power sourceDokumentation · 2026-11-18
Repair and service options
Contact the hearing care provider for faults and authorized repair.Dokumentation · 2026-11-18
Status indicators
Separate three-light charge status per hearing aid, Red error states, Temperature-related warning indicatorsDokumentation · 2026-11-18
Storage conditions
Transport and storage −4–122 °F (−20–50 °C), 10–95% relative humidity and 750–1060 mbar.Dokumentation · 2026-11-18
Warranty terms
Two years for this model in Widex’s Japan catalog. Confirm U.S. terms with your supplier.Dokumentation · 2026-11-18
Weight
74 g

Body without external accessories, per Widex Japan.

Dokumentation · 2026-11-18

How to set up Widex Standard Charger

Verbinden Sie das mitgelieferte USB-Kabel mit einem kompatiblen Netzadapter. Stellen Sie die Dockingstation auf eine stabile Oberfläche und setzen Sie beide Hörgeräte ein. Prüfen Sie die grünen Leuchten. Halten Sie beim Herausnehmen das Gehäuse des Hörgeräts fest, um ein Ziehen am Draht oder Schlauch zu vermeiden.

Vor dem Kauf prüfen

Choose WPT301 for supported Allure RIC or BTE aids. The Allure ITE has its own WPT501 charger. This dock needs an external power source and has no built-in drying or UV-C cycle.

Check the lights before leaving the dock

Each well has three indicators. Three steady green lights mean that aid is fully charged. If the lights flash red after reseating the aid, follow the guide’s troubleshooting or contact the provider.

Quelle

Takes up less room on a nightstand

The Standard Charger is about 2.4 inches wide and 1.7 inches deep. It takes up less space than the Charge n Clean and keeps the wells open for easy access. Both versions fit the same documented Allure RIC and BTE models.

Quelle

Offers charging alone

If you just want to recharge your compatible Widex Allure RIC or BTE aids, the Standard Charger has open wells for that job. For the same supported models, the Charge n Clean adds a 90-minute drying and UV-C cycle during charging.

Quelle

Verwandtes Zubehör

Aktuelle Angebote werden geprüft…

Dokumentation geprüft am 18. Nov. 2026