Original-style ReSound charging case with two slots, a center receiver pocket and a front battery indicator.

ReSound Charger

Laden Sie kompatible ältere ReSound Hinter-dem-Ohr-Hörgeräte mit externem Hörer zu Hause oder fernab einer Steckdose wieder auf.

Was Charger kann

Das ursprüngliche ReSound C-1 ist ein Ladeetui mit Deckel und internem Akku. Die dokumentierte Version CFF 3 passt zu wiederaufladbaren LiNX Quattro RIE 61 und ReSound Key RIE Modellen mit der passenden Form. Zwei Steckplätze laden das linke und rechte Hörgerät. Prüfen Sie vor dem Kauf eines Ersatzes die Formfaktornummer im Inneren des Etuis.

Which hearing aids work with ReSound Charger?

Laden

  • ReSound LiNX Quattro RIE 61

    ReSound LiNX Quattro rechargeable RIE 61 (RE61-DRWC group). Confirm the CFF 3 label and the exact supplied/approved case before using. Match the marked CFF 3 charging wells to compatible rechargeable ReSound RIE aids.

  • ReSound Key RIE 61

    Rechargeable ReSound Key RIE 61 (KE61-DRWC group). Confirm the CFF 3 label and the exact supplied/approved case before using. Match the marked CFF 3 charging wells to compatible rechargeable ReSound RIE aids.

Wählen Sie das genaue Modell auf Ihren Hörgeräten oder Unterlagen. Ein Treffer für eine Produktfamilie belegt nicht die Unterstützung jedes Modells dieser Familie.

Was möchten Sie tun?
Dokumentierte Geräte und Konfigurationen anzeigen
  • ReSound LiNX Quattro RIE 61 · Genaues Modell

    Original C-1 case with rechargeable LiNX Quattro RIE 61 · Laden

    ReSound LiNX Quattro rechargeable RIE 61 (RE61-DRWC group). Confirm the CFF 3 label and the exact supplied/approved case before using.

    Zusätzliche Einrichtung erforderlich

    ReSound LiNX Quattro rechargeable RIE 61 (RE61-DRWC group). Confirm the CFF 3 label and the exact supplied/approved case before using.

    • Match the marked CFF 3 charging wells to compatible rechargeable ReSound RIE aids.
    Quelle · 2026-11-18
  • ReSound Key RIE 61 · Genaues Modell

    CFF 3 case fit for rechargeable ReSound Key RIE 61 · Laden

    Rechargeable ReSound Key RIE 61 (KE61-DRWC group). Confirm the CFF 3 label and the exact supplied/approved case before using.

    Zusätzliche Einrichtung erforderlich

    Rechargeable ReSound Key RIE 61 (KE61-DRWC group). Confirm the CFF 3 label and the exact supplied/approved case before using.

    • Match the marked CFF 3 charging wells to compatible rechargeable ReSound RIE aids.
    Quelle · 2026-11-18

Dokumentierte Funktionen

Power and charging

Automatic hearing-aid power
Hearing aids turn off in the active charger and turn on on removal.

After standby or depleted case power, the aids may need to be turned on using their own button.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Charging-case recharge time
3,5 Stunden

Maximum for recharging the internal case battery, depending on its starting charge.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Charge case and aids together
Unterstützt

The original instructions describe leaving both the hearing aids and case connected overnight.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Unpowered storage behavior
After extended storage or if the charger battery runs out, the aids can stay off when removed.

The FAQ describes standby after 24 hours and recommends the hearing-aid button to restart following that condition.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Hearing-aid and receiver fit
CFF 3 for the listed rechargeable LiNX Quattro RIE and Key RIE styles

The international chart groups those fits. Verify the label for any replacement.

Dokumentation · 2026-11-18
Charging indicators
A slowly pulsing light on the hearing aid indicates charging; a steady light means fully charged.

The case’s front scale refers to the aid with the lower battery level.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Charging method
Inductive charging from the matching case slots

Correct form factor is required.

Dokumentation · 2026-11-18
Charging slots
2 aids

Separate left and right wells plus a central receiver pocket.

Dokumentation · 2026-11-18
Charging temperature limits
32–104 °F (0–40 °C)

Charging may not start immediately when the hearing aid is below the stated temperature.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Full hearing-aid charge time
3 Stunden

Maximum for the documented LiNX Quattro rechargeable RIE 61, depending on battery level.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Electrical input requirements
Use the manufacturer-supplied Micro-USB power cable and power adapter.

Technical table gives the internal battery’s rating separately. Replacement supply rating and approval were not generalized.

Dokumentation · 2026-11-18
Portable charger battery
3.7 V, 2,600 mAh lithium-ion case battery

Original LiNX Quattro case technical data. Later C-1 cases can have different battery specifications.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Charges away from a power outlet
UnterstütztDokumentation · 2026-11-18
Portable full pair charges
3 pair charges

Manufacturer minimum of three full charges for two matching aids from a fully charged case without wall power.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Power adapter included
Unterstützt

The original manufacturer charging setup calls out the supplied adapter.

Konfiguration: Original C-1 case with rechargeable LiNX Quattro RIE 61

Dokumentation · 2026-11-18
Power connector
Micro-USB

Original LiNX Quattro C-1 connector. The Jabra M1 guide shows USB-C on its own portable case.

Dokumentation · 2026-11-18
Kein USB-C-Stromanschluss

The original C-1 guide identifies Micro-USB on the case. Check the connector on your unit.

Dokumentation · 2026-11-18

Care and fit

Cleaning materials
Dry cloth and a clean cotton swab

Apply to the exterior and charging or receiver bays.

Dokumentation · 2026-11-18
Keine Trocknungsfunktion

Insert dry aids; the guide shows charging and manual cleaning without a drying stage.

Dokumentation · 2026-11-18
Kein UV-Reinigungszyklus

The original manual covers charging with no ultraviolet treatment stage.

Dokumentation · 2026-11-18

Design and everyday use

Control accessibility
Blue left slot, red right slot and distinct front and rear light groups.

The case relies on visual charging feedback. No audible case status is specified.

Dokumentation · 2026-11-18
Dimensions
99.4 × 35 × 67.5 mm

Documented original LiNX Quattro case dimensions in the datasheet’s order.

Dokumentation · 2026-11-18
Included items
Hearing aid charger, Charging cable, Power adapter

The instructions show the manufacturer’s included power supply. Check the replacement kit contents.

Dokumentation · 2026-11-18
Routine maintenance
Wipe the outside with a dry cloth and clean the receiver and charging bays with a clean cotton swab.

The manufacturer directs users to keep the charger and hearing aids dry.

Dokumentation · 2026-11-18
Operating conditions
32–104 °F (0–40 °C)

Manufacturer operating and charging range for this case and matching LiNX Quattro aids.

Dokumentation · 2026-11-18
Physische Bedienelemente
Charging slots and storage lid

Insert the aids to charge; the diagram shows no separate operating button on this case.

Dokumentation · 2026-11-18
Regional variants
GN lists CFF 3 Premium case kit 21810900 for the U.S., 21811000 for the U.K. and 21811100 for Europe.

Match the label; these are cited declaration rows and do not establish current inventory.

Dokumentation · 2026-11-18
Required extras
Compatible rechargeable aid, Matched charging slots, Approved Micro-USB cable and power adapter

Match the exact hearing aid and charger markings.

Dokumentation · 2026-11-18
Repair and service options
Ask a hearing care provider about the approved replacement part and any available service.

Exact current regional service terms were not verified.

Dokumentation · 2026-11-18
Status indicators
Five lights at the front show the lower aid’s charge, Three lights at the back show case battery charge, Each aid indicates its own charge status

Front lights display for ten seconds after inserting or removing an aid. The hearing aids keep charging.

Dokumentation · 2026-11-18
Storage conditions
−4 to 113 °F (−20 to 45 °C)

Original charger and LiNX Quattro aid storage temperatures.

Dokumentation · 2026-11-18
Weight
145 g

Original case without a confirmed shipping-package weight.

Dokumentation · 2026-11-18

How to set up ReSound Charger

Verwenden Sie für das Original-Ladegerät das zugelassene Micro-USB-Kabel und Netzteil. Legen Sie trockene Hörgeräte in die passenden blauen und roten Fächer und legen Sie ihre Hörer in die mittlere Vertiefung. Die Lichter der Hörgeräte pulsieren während des Ladevorgangs und leuchten dauerhaft, wenn sie vollständig geladen sind. Die drei Lichter auf der Rückseite zeigen den Batteriestand des Etuis an.

Vor dem Kauf prüfen

This is the original ReSound C-1 case documented with LiNX Quattro. Other cases can look similar and use a different charging slot or power cable. Confirm the exact aid and case markings. The inherited Jabra links do not establish interchangeability.

Can recharge a pair away from an outlet

If your rechargeable LiNX Quattro or Key aids take the CFF 3 charger, the difference between the original C-1 case and the CFF 3 ReSound Desktop Charger is where you can use them. The C-1 carries its own battery for travel. The open desktop dock needs power throughout each charge.

Quelle

Verwandtes Zubehör

Aktuelle Angebote werden geprüft…

Dokumentation geprüft am 18. Nov. 2026