- Accessory directory
- Hearing Aid Chargers
- Phonak ChargerGo RIC I EON
Phonak ChargerGo RIC I EON
Recharge compatible Phonak EON hearing devices at home or away from a wall outlet.
What ChargerGo RIC I EON does
This lidded case charges compatible Phonak Audéo EON R, EON Sphere, and CROS EON R devices. Its built-in battery can recharge the hearing aids up to three times when the case starts full. At home, use the USB-C port to power the case and charge the hearing aids. A separate battery light shows whether the case has enough power for another charge.
Which hearing aids work with Phonak ChargerGo RIC I EON?
Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.
View documented devices and setups
- Phonak Audéo EON R · Exact model
Charging hearing aids from the built-in case battery · charging
Documented supportSource · 2026-11-18 - Phonak Audéo EON R · Exact model
Plugged in with approved USB power · charging
Documented supportSource · 2026-11-18 - Phonak Audéo EON Sphere · Exact model
Charging hearing aids from the built-in case battery · charging
Documented supportSource · 2026-11-18 - Phonak Audéo EON Sphere · Exact model
Plugged in with approved USB power · charging
Documented supportSource · 2026-11-18
Documented features
Power and charging
- Automatic hearing-aid power
- Aids switch off when inserted for charging and can be set to turn on automatically when removed. Fully charged aids enter sleep after 15 minutes in the charger.
The manual’s default auto-on description refers to a powered charger. A provider can disable automatic startup.
Documentation · 2026-11-18 - Case battery is not user-replaceable
The case may only be opened by authorized personnel. User replacement is unsupported. Manufacturer service replacement of the bare cell is unverified.
Documentation · 2026-11-18- Unpowered storage behavior
- A charged case keeps supplying the hearing aids after unplugging until the internal battery is depleted.
Aids can remain in the powered case after reaching full charge. The manual does not quantify behavior or drain after the case battery reaches zero.
Documentation · 2026-11-18 - Hearing-aid and receiver fit
- Phonak Audéo E-R, Audéo E-Sphere, CROS E-R, and documented Audéo E-R and E-Sphere Trial models
The EON wells have a cavity for earpieces. Check large custom molds individually. Earlier Infinio variants use different cases.
Documentation · 2026-11-18 - Charging indicators
- Green USB-C power light, green/red case level light, and blinking red/orange/green or solid green hearing-aid lights.
The case LED has separate plugged-in and unplugged meanings. With the case plugged in, a red case light can indicate a charging error.
Documentation · 2026-11-18 - Charging method
- Contact charging in left and right slots
Align each device with its marked slot. The safety guide identifies powered contacts.
Documentation · 2026-11-18 - Charging slots
- 2 aids
One left and one right charging slot, with a space for earpieces.
Documentation · 2026-11-18 - Charging temperature limits
- Charge within 41–104°F (5–40°C).
Keep the case dry, out of direct heat, and within the published operating conditions.
Documentation · 2026-11-18 - Full hearing-aid charge time
- 2.5 hours
For compatible EON RIC styles from empty to full; the guide says times are representative and depend on the starting charge.
Documentation · 2026-11-18 - Electrical input requirements
- Charger rated 5 V DC (±5%) at 350 mA. Wall supply input 100–240 V AC, 50/60 Hz. Documented adapter output 5 V DC (±5%) at 0.5–1 A.
Use the certified external supply specified in the guide.
Documentation · 2026-11-18 - Lid behavior while charging
- The charger manual instructs users to close the lid while charging, especially in humid environments.
The hearing-aid manual says the lid can be closed during charging. Neither establishes fit of every custom mold.
Documentation · 2026-11-18 - Charges away from a power outlet
- SupportedDocumentation · 2026-11-18
- Portable full pair charges
- Up to 3 full chargesDocumentation · 2026-11-18
- Power adapter included
- Supported · With conditions
For the US EPS-coded package only.
Setup: US retail package with external power supply
Documentation · 2026-11-18 - Power adapter not included
The separate NO EPS code ships as a package without a power supply.
Setup: Charger packaged without an external power supply
Documentation · 2026-11-18- Power connector
- USB-C receptacle on the rear, USB-A to USB-C cable rated for at least 1 A at 5 V, up to 3 m (about 10 ft)
Use the supplied cable and an approved USB power adapter.
Documentation · 2026-11-18 - Quick charge duration
- 30 minutes
The dedicated U.S. guides report about 25% after 30 minutes for compatible EON models. The time describes aid charging.
Documentation · 2026-11-18 - USB-C power input
- Supported
Use the rear USB-C port with the specified USB-A to USB-C cable.
Documentation · 2026-11-18
Care and fit
- Cleaning materials
- Soft, lint-free cloth
Unplug before cleaning. Keep the case dry and avoid household cleaners, soap, and rinsing.
Documentation · 2026-11-18
Design and everyday use
- Control accessibility
- The slots are labeled L and R and the earpieces rest in the middle cavity. Indicator lights show power and charging.
The manufacturer does not provide a dexterity assessment. Low-battery beeps come from the hearing aids.
Documentation · 2026-11-18 - Included items
- Charger, USB-A to USB-C cable, External power adapter in US EPS version
The USB supply and cable are shown in the guide. The US EPS listing confirms the package classification. Confirm replacement-box contents with the seller.
Setup: US retail package with external power supply
Documentation · 2026-11-18 - Ingress protection rating
- IP22
The rating applies with the lid closed. The guide tells owners to keep the charger dry.
Documentation · 2026-11-18 - Routine maintenance
- Unplug the charger and remove dust and dirt with a soft, lint-free cloth. Keep the charging slots, USB socket, and adapters dry.
Check the wells regularly. Recharge the built-in battery every three months if stored.
Documentation · 2026-11-18 - Operating conditions
- 41–104°F (5–40°C), 0–90% noncondensing humidity, 500–1,060 hPa
The charging temperature window is the same as the operating window.
Documentation · 2026-11-18 - Physical controls
- Hinged lid, First-use battery insulation tab, Left/right charging slots, Rear USB-C power port
The tab activates the internal battery. There is no normal off switch for the rechargeable case.
Documentation · 2026-11-18 - Regional variants
- 075-0108-11 US EPS and 075-0108-10 NO EPS, plus 075-0108-11090 US EPS VA
The package code determines what power adapter comes with the case. No performance differences inferred from package codes.
Documentation · 2026-11-18 - Required extras
- Approved USB power supply if the selected package does not include one
Check the package label and use the manufacturer-specified certified power supply.
Setup: Charger packaged without an external power supply
Documentation · 2026-11-18 - Repair and service options
- Consult the hearing care provider for repairs or replacement. Only authorized personnel may open the charger.
The manual states a five-year expected service life and at least five years of repair service after phase-out.
Documentation · 2026-11-18 - Status indicators
- Green power light at USB-C port, Separate green/red case battery status light, Red/orange/green lights on the hearing aids
The USB-C light shows external power. The aid LEDs show their own charging progress.
Documentation · 2026-11-18 - Storage conditions
- Transport and storage: −4–140°F (−20–60°C), 0–93% noncondensing humidity, 500–1,060 hPa
The charger guide cautions against prolonged storage outside 50–86°F (10–30°C). Recharge the internal battery every three months during storage.
Documentation · 2026-11-18 - Warranty terms
- One-year Sonova limited international warranty for manufacturing and material defects from the purchase date with proof of purchase
Local terms come from the seller. Improper handling, chemical exposure and unauthorized servicing are excluded.
Documentation · 2026-11-18
How to set up Phonak ChargerGo RIC I EON
Remove the insulating tab before first use to activate the case battery. Plug the USB-A end into a suitable wall power adapter and the USB-C end into the charger. The light at the power port turns green. Put each dry hearing device in its matching left or right well and close the lid. A full charge typically takes about 2.5 hours for the EON styles. Lift the devices out by their housings.
What to check before buying
A flat case battery stops charging away from an outlet. Once plugged in, the case can charge the hearing aids even if the case battery is empty. Check that your device is an EON style listed in the guide. Other similarly named Infinio cases have different fit lists. Use the charger at 41–104°F, with the hearing devices and charging wells dry.
Charges hearing aids away from a wall outlet
Compared with Phonak’s Charger RIC E, this case has a built-in battery. A full case battery can recharge compatible EON hearing aids up to three times without plugging in. Both cases are listed for Audéo EON R, EON Sphere, and CROS E-R.
SourceSet the hearing devices in the matching slots
Remove the insulating tab before first use to activate the case battery. Plug the USB-A end into a suitable wall power adapter and the USB-C end into the charger. The light at the power port turns green. Put each dry hearing device in its matching left or right well and close the lid. A full charge typically takes about 2.5 hours for the EON styles. Lift the devices out by their housings.
SourceCheck the charging lights
A green USB-C light confirms power. The separate case light reports its battery level and changes meaning when unplugged. Check the hearing aids themselves for charge progress. If the plugged-in case shows a solid red battery light, check whether the aids still charge and contact your provider.
SourceCheck how much charge the case has left
When unplugged, a steady green case light means enough power to charge the hearing aids at least once. A blinking green light means less than one charge remains. The light turns off after a short time to save power, so check the case before heading out.
SourceRelated accessories
Other devices named in the documentation
These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.
Checking current offers…
Documentation checked Nov 18, 2026