The ReSound Custom Charger opens to reveal two fitted slots for rechargeable in-ear hearing aids.

ReSound Custom charger

Charge compatible rechargeable ReSound custom in-ear hearing aids in a case with fitted inserts.

What Custom charger does

The ReSound Custom Charger uses inserts shaped for your rechargeable in-ear hearing aids. Put each aid into its own slot, connect the charger to power and close the lid. Lights on the front show how each side is charging.

Which hearing aids work with ReSound Custom charger?

Charging

  • ReSound Custom Made by ReSound ITC

    ReSound Custom Made by ReSound ITC with the shell-matched charging insert. Check the rechargeable model and its insert. Use a compatible rechargeable aid and the charging insert made for its fitted shell.

  • ReSound Nexia ITC

    ReSound Nexia rechargeable ITC with the shell-matched charging insert. Check the rechargeable model and its insert. Use a compatible rechargeable aid and the charging insert made for its fitted shell.

  • ReSound Nexia ITE

    ReSound Nexia rechargeable ITE with the shell-matched charging insert. Check the rechargeable model and its insert. Use a compatible rechargeable aid and the charging insert made for its fitted shell.

  • ReSound OMNIA ITC

    ReSound OMNIA rechargeable ITC with the shell-matched charging insert. Check the rechargeable model and its insert. Use a compatible rechargeable aid and the charging insert made for its fitted shell.

  • ReSound Sensia ITC Rechargeable

    ReSound Sensia ITC Rechargeable with the shell-matched charging insert. Check the rechargeable model and its insert. Use a compatible rechargeable aid and the charging insert made for its fitted shell.

  • ReSound Sensia ITE Rechargeable

    ReSound Sensia ITE Rechargeable with the shell-matched charging insert. Check the rechargeable model and its insert. Use a compatible rechargeable aid and the charging insert made for its fitted shell.

Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.

What do you want to do?
View documented devices and setups
  • ReSound Custom Made by ReSound ITC · Exact model

    Powered charger with matching inserts and closed lid · charging

    ReSound Custom Made by ReSound ITC with the shell-matched charging insert. Check the rechargeable model and its insert.

    Requires additional setup

    ReSound Custom Made by ReSound ITC with the shell-matched charging insert. Check the rechargeable model and its insert.

    • Use a compatible rechargeable aid and the charging insert made for its fitted shell.
    Source · 2026-11-18
  • ReSound Nexia ITC · Exact model

    Powered charger with matching inserts and closed lid · charging

    ReSound Nexia rechargeable ITC with the shell-matched charging insert. Check the rechargeable model and its insert.

    Requires additional setup

    ReSound Nexia rechargeable ITC with the shell-matched charging insert. Check the rechargeable model and its insert.

    • Use a compatible rechargeable aid and the charging insert made for its fitted shell.
    Source · 2026-11-18
  • ReSound Nexia ITE · Exact model

    Powered charger with matching inserts and closed lid · charging

    ReSound Nexia rechargeable ITE with the shell-matched charging insert. Check the rechargeable model and its insert.

    Requires additional setup

    ReSound Nexia rechargeable ITE with the shell-matched charging insert. Check the rechargeable model and its insert.

    • Use a compatible rechargeable aid and the charging insert made for its fitted shell.
    Source · 2026-11-18
  • ReSound OMNIA ITC · Exact model

    Powered charger with matching inserts and closed lid · charging

    ReSound OMNIA rechargeable ITC with the shell-matched charging insert. Check the rechargeable model and its insert.

    Requires additional setup

    ReSound OMNIA rechargeable ITC with the shell-matched charging insert. Check the rechargeable model and its insert.

    • Use a compatible rechargeable aid and the charging insert made for its fitted shell.
    Source · 2026-11-18
  • ReSound Sensia ITC Rechargeable · Exact model

    Powered charger with matching inserts and closed lid · charging

    ReSound Sensia ITC Rechargeable with the shell-matched charging insert. Check the rechargeable model and its insert.

    Requires additional setup

    ReSound Sensia ITC Rechargeable with the shell-matched charging insert. Check the rechargeable model and its insert.

    • Use a compatible rechargeable aid and the charging insert made for its fitted shell.
    Source · 2026-11-18
  • ReSound Sensia ITE Rechargeable · Exact model

    Powered charger with matching inserts and closed lid · charging

    ReSound Sensia ITE Rechargeable with the shell-matched charging insert. Check the rechargeable model and its insert.

    Requires additional setup

    ReSound Sensia ITE Rechargeable with the shell-matched charging insert. Check the rechargeable model and its insert.

    • Use a compatible rechargeable aid and the charging insert made for its fitted shell.
    Source · 2026-11-18

Documented features

Power and charging

Hearing-aid and receiver fit
Matched inserts for documented rechargeable custom ITC and ITE shells

Check the individual insert and aid label. Match the rechargeable shell rather than using a similar-looking disposable-battery aid.

Documentation · 2026-11-18
Charging indicators
Slow green pulse means charging, steady green means full, and fast blinking means a charging error.

Each aid has its own front light. The lights can go dark while charging.

Setup: Powered charger with matching inserts and closed lid

Documentation · 2026-11-18
Charging method
Inductive charging in custom-made insertsDocumentation · 2026-11-18
Charging slots
2 aids

Each side can charge independently.

Documentation · 2026-11-18
Charging temperature limits
41–86 °F (5–30 °C) normal operation

This is the exact C-4 guide range; humidity and vapor-pressure limits also apply.

Setup: Powered charger with matching inserts and closed lid

Documentation · 2026-11-18
Full hearing-aid charge time
5 hours

Typical C-4 manual figure under recommended conditions; depends on the aids’ initial battery level.

Setup: Powered charger with matching inserts and closed lid

Documentation · 2026-11-18
Electrical input requirements
5 V USB power supply

Use the supplied power adapter and cable.

Documentation · 2026-11-18
Lid behavior while charging
Close the lid fully to begin charging.

The aids must be correctly seated and the case connected to external power.

Setup: Powered charger with matching inserts and closed lid

Documentation · 2026-11-18
Charging requires external power

Needs external power and properly seated aids before the closed lid starts charging.

Documentation · 2026-11-18
Power adapter included
Supported

Included in the manual’s manufacturer kit; verify replacement box contents.

Documentation · 2026-11-18
Power connector
USB-C on the back of the chargerDocumentation · 2026-11-18
USB-C power input
Supported

USB-C is the case input; the manufacturer supplies a USB-A to USB-C cable.

Documentation · 2026-11-18

Care and fit

Cleaning materials
Dry, soft cloth for the case

Follow the custom-insert guide for removing and cleaning the fitted pieces.

Documentation · 2026-11-18
No drying function

The instructions require dry aids at insertion and specify a charging-only operation.

Documentation · 2026-11-18
No UV cleaning cycle

The C-4 manual describes charging and manual care of the case with no UV stage.

Documentation · 2026-11-18

Design and everyday use

Control accessibility
Slots labeled L and R, separate charging lights, and a lid that triggers charging when fully closed

The labels and indicators are visual. No alternate accessible indicator is specified.

Documentation · 2026-11-18
Dimensions
82.9 × 48.0 × 58.0 mm

Published dimensions in manufacturer order.

Documentation · 2026-11-18
Included items
C-4 charger, Power adapter, USB-A to USB-C cable

The supplied plug design can vary by region.

Documentation · 2026-11-18
Routine maintenance
Disconnect power and follow the manufacturer’s cleaning instructions. Insert hearing aids only when dry.Documentation · 2026-11-18
Operating conditions
41–86 °F (5–30 °C), 15–90% RH noncondensing, 700–1,060 hPa

50 hPa maximum water-vapor partial pressure where applicable.

Documentation · 2026-11-18
Physical controls
Lid closure starts charging when correctly seated and powered

The charging guide identifies no on-case operating button. Power and slot indicators are separate.

Documentation · 2026-11-18
Regional variants
Manufacturer-supplied wall plug design varies by region.

A complete list of case and molded insert order codes was not verified.

Documentation · 2026-11-18
Replacement parts
Matched custom charging inserts

Orderable individual part numbers were not confirmed for this exact case.

Documentation · 2026-11-18
Required extras
Matched custom-made charger inserts, Compatible rechargeable custom hearing aids

The insert must match the fitted shell. Bring the case to appointments for fit checks.

Documentation · 2026-11-18
Repair and service options
Contact your hearing care provider about charging problems, fitting inserts, or a replacement cord or power adapter.Documentation · 2026-11-18
Status indicators
Rear green power light, Separate front charging lights for each hearing aid, Fast blink for an error

The front indicator can go dark during charging to avoid disturbing sleep.

Documentation · 2026-11-18
Storage conditions
−13 to 41 °F (−25 to 5 °C); 41 to 95 °F (5 to 35 °C) up to 90% RH noncondensing; above 95 to 158 °F (35 to 70 °C) up to 50 hPa water-vapor pressure

The guide specifies warm-up and cool-down following exposure to extremes.

Documentation · 2026-11-18
Weight
108 g

The charger technical table lists 108 g (3.8 ounces).

Documentation · 2026-11-18

How to set up ReSound Custom charger

Use the supplied USB-C cable and wall adapter. Seat the dry aids fully in the slots marked left and right, then close the lid to begin charging. A slow green pulse indicates charging and steady green means full. If a light blinks quickly, reseat the aid and check the connection.

What to check before buying

The C-4 case needs external power and the lid must close fully. Each insert is made for the matching shell, so check fit with your hearing care provider before ordering a replacement. GN lists five hours under recommended conditions in the charger guide. The exact charge time depends on the hearing aids and their starting charge.

Closes around inserts shaped for your hearing aids

A conventional dock such as the ReSound Desktop Charger holds compatible receiver-in-ear or behind-the-ear aids in slots for that model. ReSound’s Custom Charger goes a step further. Each insert is shaped for the wearer’s individual in-ear shell, and charging starts when the lid closes.

Source

Related accessories

Checking current offers…

Documentation checked Nov 18, 2026