Phonak RemoteControl with three marked buttons and lanyard

Phonak RemoteControl

Adjust volume and change listening programs with physical buttons.

What RemoteControl does

This pocket remote gives you three physical buttons to turn hearing-aid volume up or down and step through fitted programs. Use it on its own after pairing compatible Phonak hearing aids. A small indicator shows when the remote accepted a button press, needs a battery or is ready to pair.

Which hearing aids work with Phonak RemoteControl?

Remote control

  • Phonak Audéo EON R

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff. Have Phonak or your provider verify that the exact remote edition supports these hearing aids.

  • Phonak Audéo EON Sphere

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff. Have Phonak or your provider verify that the exact remote edition supports these hearing aids.

  • Phonak Audéo Infinio Ultra R

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff. Have Phonak or your provider verify that the exact remote edition supports these hearing aids.

  • Phonak Audéo Infinio Ultra Sphere

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff. Have Phonak or your provider verify that the exact remote edition supports these hearing aids.

  • Phonak Audéo Lumity L-312

    Use the wireless model and pair the correct accessory directly to the hearing aids.

  • Phonak Audéo Lumity Life

    Use the wireless model and pair the correct accessory directly to the hearing aids.

View documented devices and setups

Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.

What do you want to do?
View documented devices and setups
  • Phonak Audéo EON R · Exact model

    Phonak-confirmed RemoteControl edition for Infinio or EON · remote_control

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    Requires additional setup

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    • Have Phonak or your provider verify that the exact remote edition supports these hearing aids.
    Source · 2026-11-18
  • Phonak Audéo EON Sphere · Exact model

    Phonak-confirmed RemoteControl edition for Infinio or EON · remote_control

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    Requires additional setup

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    • Have Phonak or your provider verify that the exact remote edition supports these hearing aids.
    Source · 2026-11-18
  • Phonak Audéo Infinio Ultra R · Exact model

    Phonak-confirmed RemoteControl edition for Infinio or EON · remote_control

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    Requires additional setup

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    • Have Phonak or your provider verify that the exact remote edition supports these hearing aids.
    Source · 2026-11-18
  • Phonak Audéo Infinio Ultra Sphere · Exact model

    Phonak-confirmed RemoteControl edition for Infinio or EON · remote_control

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    Requires additional setup

    Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

    • Have Phonak or your provider verify that the exact remote edition supports these hearing aids.
    Source · 2026-11-18
  • Phonak Audéo Lumity L-312 · Exact model

    Three-button remote paired directly to compatible aids · remote_control

    Use the wireless model and pair the correct accessory directly to the hearing aids.

    Documented support

    Use the wireless model and pair the correct accessory directly to the hearing aids.

      Source · 2026-11-18
    • Phonak Audéo Lumity Life · Exact model

      Three-button remote paired directly to compatible aids · remote_control

      Use the wireless model and pair the correct accessory directly to the hearing aids.

      Documented support

      Use the wireless model and pair the correct accessory directly to the hearing aids.

        Source · 2026-11-18
      • Phonak Audéo Lumity R · Exact model

        Three-button remote paired directly to compatible aids · remote_control

        Use the wireless model and pair the correct accessory directly to the hearing aids.

        Documented support

        Use the wireless model and pair the correct accessory directly to the hearing aids.

          Source · 2026-11-18
        • Phonak Audéo Lumity RT · Exact model

          Three-button remote paired directly to compatible aids · remote_control

          Use the wireless model and pair the correct accessory directly to the hearing aids.

          Documented support

          Use the wireless model and pair the correct accessory directly to the hearing aids.

            Source · 2026-11-18
          • Phonak Bolero M M · Exact model

            Three-button remote paired directly to compatible aids · remote_control

            Use the wireless model and pair the correct accessory directly to the hearing aids.

            Documented support

            Use the wireless model and pair the correct accessory directly to the hearing aids.

              Source · 2026-11-18
            • Phonak Bolero M PR · Exact model

              Three-button remote paired directly to compatible aids · remote_control

              Use the wireless model and pair the correct accessory directly to the hearing aids.

              Documented support

              Use the wireless model and pair the correct accessory directly to the hearing aids.

                Source · 2026-11-18
              • Phonak Naída Lumity P-PR · Exact model

                Three-button remote paired directly to compatible aids · remote_control

                Use the wireless model and pair the correct accessory directly to the hearing aids.

                Documented support

                Use the wireless model and pair the correct accessory directly to the hearing aids.

                  Source · 2026-11-18
                • Phonak Naída Lumity P-UP · Exact model

                  Three-button remote paired directly to compatible aids · remote_control

                  Use the wireless model and pair the correct accessory directly to the hearing aids.

                  Documented support

                  Use the wireless model and pair the correct accessory directly to the hearing aids.

                    Source · 2026-11-18
                  • Phonak Naída M SP · Exact model

                    Three-button remote paired directly to compatible aids · remote_control

                    Use the wireless model and pair the correct accessory directly to the hearing aids.

                    Documented support

                    Use the wireless model and pair the correct accessory directly to the hearing aids.

                      Source · 2026-11-18
                    • Phonak Naída Paradise P-PR · Exact model

                      Three-button remote paired directly to compatible aids · remote_control

                      Use the wireless model and pair the correct accessory directly to the hearing aids.

                      Documented support

                      Use the wireless model and pair the correct accessory directly to the hearing aids.

                        Source · 2026-11-18
                      • Phonak Naída Paradise P-UP · Exact model

                        Three-button remote paired directly to compatible aids · remote_control

                        Use the wireless model and pair the correct accessory directly to the hearing aids.

                        Documented support

                        Use the wireless model and pair the correct accessory directly to the hearing aids.

                          Source · 2026-11-18
                        • Phonak Virto Infinio R · Exact model

                          Phonak-confirmed RemoteControl edition for Infinio or EON · remote_control

                          Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

                          Requires additional setup

                          Use an edition verified to support this exact Infinio/EON model. Phonak excludes some older RemoteControl hardware and does not publish a complete serial cutoff.

                          • Have Phonak or your provider verify that the exact remote edition supports these hearing aids.
                          Source · 2026-11-18
                        • Phonak Virto M M-312 · Exact model

                          Three-button remote paired directly to compatible aids · remote_control

                          Use the wireless model and pair the correct accessory directly to the hearing aids.

                          Documented support

                          Use the wireless model and pair the correct accessory directly to the hearing aids.

                            Source · 2026-11-18
                          • Phonak Virto Paradise 312 · Exact model

                            Three-button remote paired directly to compatible aids · remote_control

                            Use the wireless model and pair the correct accessory directly to the hearing aids.

                            Documented support

                            Use the wireless model and pair the correct accessory directly to the hearing aids.

                              Source · 2026-11-18

                            Documented features

                            Listening and control

                            Remote carry options
                            Pocket or purse, Included lanyard

                            Body dimensions and weight are in the technical data; there is no clip in the standard diagram.

                            Documentation · 2026-11-18
                            Independent ear control
                            Volume controls are shared for the paired fitting.

                            No separate left/right selector is shown. Independent ear adjustment is not a documented remote function.

                            Documentation · 2026-11-18
                            Control confirmation
                            Brief green light after a button press. A green light and an available hearing-aid beep confirm successful pairing.

                            No screen shows the selected program or volume level.

                            Documentation · 2026-11-18
                            No control lock

                            There is an on/off slider but no separate lock state or lock button.

                            Documentation · 2026-11-18
                            Return to default settings
                            Hold plus and the program button together for more than 10 seconds.

                            Reset removes the pairing. The indicator turns green to confirm reset.

                            Documentation · 2026-11-18
                            Cannot mute the hearing aid microphones

                            The three documented buttons change volume or program. No dedicated aid-microphone mute action is available on these controls.

                            Documentation · 2026-11-18
                            Change hearing-aid programs
                            Supported

                            The round program button advances to the next available hearing-aid program.

                            Documentation · 2026-11-18
                            Remote pairing capacity
                            One or two aids in a single fitting

                            Does not document switching between multiple fittings.

                            Documentation · 2026-11-18
                            Streaming controls
                            Select the hearing-aid program for a paired Phonak TV Connector

                            Check how the TV program was fitted. The remote does not directly power the TV Connector.

                            Documentation · 2026-11-18
                            Volume control
                            Supported

                            Use the plus and minus buttons to adjust paired hearing aids.

                            Documentation · 2026-11-18

                            Connections

                            Companion app control
                            myPhonak is an optional way to control supported hearing aids alongside the physical remote.

                            Disable Stay Connected if the remote becomes unresponsive. The app controls the aids, not this remote’s hardware.

                            Documentation · 2026-11-18
                            Bilateral and unilateral use
                            Controls one hearing aid or a paired set of two.

                            Press minus after the first aid pairs to stop the search for a second aid. The hardware has no dedicated left/right selector.

                            Documentation · 2026-11-18
                            Connection priority
                            If the physical remote becomes unresponsive while using myPhonak, turn off Stay Connected under Devices > Connection Management.

                            This applies when keeping both physical remote and app in use. Straightforward use of the physical remote does not require an app.

                            Documentation · 2026-11-18
                            Link to hearing aids
                            Digitally coded 2.4 GHz wireless control

                            Sonova gives 2.4–2.48 GHz GFSK. Support is model and remote-edition specific.

                            Documentation · 2026-11-18
                            Hearing-aid pairing method
                            Restart compatible aids. Within three minutes, hold plus while switching the remote on. Release plus at the blue blink.

                            Pairing is automatic after the devices enter pairing mode. Solid green and an optional aid beep confirm success.

                            Documentation · 2026-11-18
                            Professional setup
                            Directly pair at home. Ask Phonak or your provider to check an older RemoteControl edition if Infinio or EON will not pair.

                            A provider sets the available listening programs in the hearing aids.

                            Documentation · 2026-11-18
                            Receiver requirements
                            Built-in compatible Phonak wireless control receiver

                            Direct pairing. No separate receiver, streamer or phone is in the basic setup.

                            Documentation · 2026-11-18
                            Reconnection behavior
                            Automatically connects to already paired hearing aids after the initial pairing.

                            After a reset, pair it again.

                            Documentation · 2026-11-18
                            Remembered hearing-aid pairings
                            2 devices

                            Counts individual aids in one fitting, not multiple pairs.

                            Documentation · 2026-11-18

                            Power and charging

                            Replaceable accessory battery
                            Supported

                            Open the sliding battery compartment and replace the CR2032 with correct polarity.

                            Documentation · 2026-11-18
                            Accessory battery type
                            One replaceable 3 V CR2032 lithium coin cell

                            Manufacturer technical data claims 12 months at average use. Exact duty cycle is not given.

                            Documentation · 2026-11-18
                            No rechargeable accessory battery

                            The remote uses a replaceable CR2032 primary cell.

                            Documentation · 2026-11-18
                            Battery status reporting
                            Solid orange warns of a low battery. The remote may show no light if the cell is empty.

                            If there is no indicator, check the power slider before replacing the battery.

                            Documentation · 2026-11-18

                            Design and everyday use

                            Control accessibility
                            Three large marked buttons, distinct program button shape, a slide power switch and confirmation light.

                            A confirmation beep can play through the aids after pairing. No dexterity or one-handed rating.

                            Documentation · 2026-11-18
                            Dimensions
                            32 × 84 × 11.5 mm (W × H × D)

                            Sonova lists 84 × 32 × 11.5 mm in length × width × height order for the handheld remote.

                            Documentation · 2026-11-18
                            Included items
                            Lanyard, CR2032 coin cell

                            Remove the insulating tab on first use. Confirm the package if buying used.

                            Documentation · 2026-11-18
                            Ingress protection rating
                            IP52

                            Manufacturer technical data. Keep the remote dry and follow its care guide.

                            Documentation · 2026-11-18
                            Routine maintenance
                            Use a lint-free cloth. The guide prefers dry cleaning. Protect the battery compartment from dirt and moisture.

                            Remove the battery if the remote is stored for a long period.

                            Documentation · 2026-11-18
                            Operating conditions
                            32–104°F (0–40°C) in the user guide

                            The 2019 technical sheet instead gives 0–45°C and 0–95% noncondensing humidity. Use the more conservative current user-guide temperature range.

                            Documentation · 2026-11-18
                            Physical controls
                            Volume up button, Volume down button, Round program button, On/off slider, Battery door

                            The manual identifies labeled tactile controls without a settings screen.

                            Documentation · 2026-11-18
                            Regional variants
                            Phonak retail 076-0065-P5 and documented OGA 076-0067-P500070

                            Different published order codes and an older-hardware exception require confirmation of the actual remote edition. The cutoff is not given.

                            Documentation · 2026-11-18
                            Replacement parts
                            CR2032 lithium coin cell

                            Install the replacement following the marked polarity. A separate lanyard part number was not verified.

                            Documentation · 2026-11-18
                            Required extras
                            Compatible Phonak hearing aids, Replacement CR2032 cell as needed

                            A phone or app is not needed for the basic volume or program functions.

                            Documentation · 2026-11-18
                            Repair and service options
                            Replace the CR2032 cell at home. Contact a hearing care professional or manufacturer representative for repairs.

                            The guide gives an expected service life of five years. The documented pairing reset is separate from repairs.

                            Documentation · 2026-11-18
                            Status indicators
                            Green readiness, pairing or button feedback, Blinking blue pairing, Solid orange battery warning, Solid red device error or temporary pairing failure, Optional hearing-aid pairing beep

                            The duration and pattern distinguish startup, pairing and a button press.

                            Documentation · 2026-11-18
                            Storage conditions
                            −4–140°F (−20–60°C); the technical sheet states 0–70% noncondensing storage humidity.

                            Keep dry in transport. Remove battery for long storage.

                            Documentation · 2026-11-18
                            Warranty terms
                            One-year limited international Phonak warranty for manufacturer and material defects with proof of purchase

                            Local terms vary. The U.S. OGA form specifies a separate three-year channel warranty.

                            Documentation · 2026-11-18
                            Wearing and placement options
                            Included lanyard

                            Lanyard attaches at the end of the handheld remote.

                            Documentation · 2026-11-18
                            Weight
                            26.4 g

                            Published gram value includes the battery. The adjacent ounce conversion is inconsistent.

                            Documentation · 2026-11-18

                            How to set up Phonak RemoteControl

                            Pull the battery tab out on first use. Restart the compatible hearing aids. Within three minutes, hold the plus button while you switch on the remote. Release plus when the indicator blinks blue. A green light and, where enabled, a confirmation beep indicate pairing. Press the round program button once to move to the next fitted program.

                            What to check before buying

                            Check the exact remote edition if you use Infinio or EON. Phonak says some older RemoteControl units cannot pair with those aids. In the myPhonak app, turn off Stay Connected if the remote stops responding while you use the app. The remote reports button presses by a light and does not show settings on a screen.

                            Confirms a button press with a light

                            The Phonak RemoteControl gives you three tactile buttons and a light to confirm a press. For comparison, a screen-equipped remote such as the ReSound Unite Remote Control 2 can also show the current volume and program. That model works with compatible ReSound aids.

                            Source

                            Pair the three-button remote

                            Pull the battery tab out on first use. Restart the compatible hearing aids. Within three minutes, hold the plus button while you switch on the remote. Release plus when the indicator blinks blue. A green light and, where enabled, a confirmation beep indicate pairing. Press the round program button once to move to the next fitted program.

                            Source

                            Use the remote alongside myPhonak

                            If the remote stops responding while the app is connected, go to Devices, choose Connection Management and turn off Stay Connected. If it still will not connect to Infinio or EON, check the exact remote edition with your provider.

                            Source

                            Companion apps

                            Related accessories

                            Other devices named in the documentation

                            These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.

                            Checking current offers…

                            Documentation checked Nov 18, 2026