Open StarLink Charger 3.0 with two compatible hearing aids seated.

Starkey StarLink Charger 3.0

Charge compatible Starkey hearing aids at a powered outlet and keep them in the same case for storage.

What StarLink Charger 3.0 does

This lidded case charges two compatible Starkey hearing aids and gives you a place to store them. The charger needs external power throughout charging. When a compatible aid’s battery is low, Starkey says ten minutes of Turbo Charge can give about three hours of use.

Which hearing aids work with Starkey StarLink Charger 3.0?

Charging

  • Starkey Omega AI+ mRIC R

    Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging. Match the mRIC R variant on the bottom of the case.

  • Starkey Omega AI+ RIC RT

    Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging. Match the RIC R/RT variant on the bottom of the case.

  • Starkey Edge AI RIC RT

    Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging. Match the RIC R/RT variant on the bottom of the case.

  • Starkey Edge AI mRIC R

    Edge AI mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging. Match the mRIC R variant on the bottom of the case.

Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.

What do you want to do?
View documented devices and setups
  • Starkey Omega AI+ mRIC R · Exact model

    Version marked mRIC R · charging

    Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    Requires additional setup

    Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    • Match the mRIC R variant on the bottom of the case.
    Source · 2026-11-18
  • Starkey Omega AI+ RIC RT · Exact model

    Version marked RIC R/RT · charging

    Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    Requires additional setup

    Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    • Match the RIC R/RT variant on the bottom of the case.
    Source · 2026-11-18
  • Starkey Edge AI RIC RT · Exact model

    Version marked RIC R/RT · charging

    Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    Requires additional setup

    Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case. Use an external power source during charging.

    • Match the RIC R/RT variant on the bottom of the case.
    Source · 2026-11-18
  • Starkey Edge AI mRIC R · Exact model

    Version marked mRIC R · charging

    Edge AI mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    Requires additional setup

    Edge AI mRIC R. Match the mRIC R variant on the bottom of the case. Use an external power source during charging.

    • Match the mRIC R variant on the bottom of the case.
    Source · 2026-11-18

Documented features

Power and charging

Automatic hearing-aid power
Compatible aids turn off when seated in the powered case and turn back on when removed. They can power on inside the case if it loses power.Documentation · 2026-11-18
Unpowered storage behavior
Aids can power on inside the case when it has no power source. Starkey says leaving the aids in the powered charger will not overcharge them.Documentation · 2026-11-18
Hearing-aid and receiver fit
The Omega AI+ mRIC R needs the mRIC R version and the RIC RT needs the RIC R/RT version. Verify the style label on the bottom of the case.Documentation · 2026-11-18
Charging indicators
Each side light confirms placement, flashes during charging and stays lit when full.Documentation · 2026-11-18
Charging slots
2 aids

Separate left and right wells are shown in the manufacturer’s diagrams.

Documentation · 2026-11-18
Full hearing-aid charge time
3.5 hours

Starkey’s 3.0 QuickTIP gives the figure for compatible rechargeable hearing aids. It does not specify individual model or remaining charge.

Documentation · 2026-11-18
Lid behavior while charging
Charging can occur open or closed, but Starkey recommends closing the lid so its silicone insert keeps the hearing aids seated.Documentation · 2026-11-18
Charging requires external power

This version has no onboard battery. Keep the charger connected to external power.

Documentation · 2026-11-18
Quick charge duration
10 minutes

Turbo Charge starts automatically when the hearing-aid battery is low.

Documentation · 2026-11-18
Runtime after quick charge
About 3 hours after a 10-minute Turbo ChargeDocumentation · 2026-11-18

Design and everyday use

Regional variants
U.S. commercial codes P00014590 (mRIC R) or P00014591 (RIC R/RT). November 2026 Government Services codes P00014661 or P00014662.

The Government Services order guide is a distinct channel. Match the physical fit and current supplier code.

Documentation · 2026-11-18
Required extras
External power source while charging, Case version marked for the exact hearing-aid styleDocumentation · 2026-11-18
Status indicators
Left and right hearing-aid lights

Both sides blink during charging and stay on when full. See case battery lights for the Premium model.

Documentation · 2026-11-18

How to set up Starkey StarLink Charger 3.0

Check the label underneath for the hearing-aid style. Plug the case into external power. Set each hearing aid into its matching slot and close the lid. The two side lights blink while the aids charge and stay on when they are full.

What to check before buying

Use the marked case for your exact mRIC R or RIC R/RT hearing aid. Some similar-looking hearing aids use a different charger. Aids can turn on in an unpowered case.

Match the charger to your hearing aid

Choose the version marked for your exact rechargeable receiver-in-canal style. The mRIC R and RIC R/RT cases have different charging wells. The commercial order numbers are P00014590 (mRIC R) or P00014591 (RIC R/RT).

Source

Read the lights while charging

Check the label underneath for the hearing-aid style. Plug the case into external power. Set each hearing aid into its matching slot and close the lid. The two side lights blink while the aids charge and stay on when they are full.

Source

Needs a power source every time you charge

If you’re choosing between the two Starkey 3.0 cases, both offer Turbo Charge and both come in mRIC R and RIC R/RT sizes. The difference for travel is power. This case needs an external supply, while the StarLink Premium Charger 3.0 can recharge the aids from its own battery.

Source

Related accessories

Other devices named in the documentation

These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.

Checking current offers…

Documentation checked Nov 18, 2026