- Accessory directory
- Hearing Aid Chargers
- Starkey StarLink Premium Charger 3.0
Starkey StarLink Premium Charger 3.0
Charge compatible Starkey hearing aids at home or away from an outlet.
What StarLink Premium Charger 3.0 does
This lidded case charges two compatible Starkey hearing aids and gives you a place to store them. The case charges your hearing aids away from a wall outlet while the built-in battery has power. When a compatible aid’s battery is low, Starkey says ten minutes of Turbo Charge can give about three hours of use.
Which hearing aids work with Starkey StarLink Premium Charger 3.0?
Charging
- Starkey Omega AI+ mRIC R
Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case. Match the mRIC R variant on the bottom of the case.
- Starkey Omega AI+ RIC RT
Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case. Match the RIC R/RT variant on the bottom of the case.
- Starkey Edge AI RIC RT
Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case. Match the RIC R/RT variant on the bottom of the case.
- Starkey Edge AI mRIC R
Edge AI mRIC R. Match the mRIC R variant on the bottom of the case. Match the mRIC R variant on the bottom of the case.
Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.
View documented devices and setups
- Starkey Omega AI+ mRIC R · Exact model
Version marked mRIC R · charging
Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case.
Requires additional setupSource · 2026-11-18Omega AI+ mRIC R. Match the mRIC R variant on the bottom of the case.
- Match the mRIC R variant on the bottom of the case.
- Starkey Omega AI+ RIC RT · Exact model
Version marked RIC R/RT · charging
Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case.
Requires additional setupSource · 2026-11-18Omega AI+ RIC RT. Match the RIC R/RT variant on the bottom of the case.
- Match the RIC R/RT variant on the bottom of the case.
- Starkey Edge AI RIC RT · Exact model
Version marked RIC R/RT · charging
Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case.
Requires additional setupSource · 2026-11-18Edge AI RIC RT. Match the RIC R/RT variant on the bottom of the case.
- Match the RIC R/RT variant on the bottom of the case.
- Starkey Edge AI mRIC R · Exact model
Version marked mRIC R · charging
Edge AI mRIC R. Match the mRIC R variant on the bottom of the case.
Requires additional setupSource · 2026-11-18Edge AI mRIC R. Match the mRIC R variant on the bottom of the case.
- Match the mRIC R variant on the bottom of the case.
Documented features
Power and charging
- Automatic hearing-aid power
- Compatible aids turn off when seated in the powered case and turn back on when removed. They can power on inside the case if it loses power.Documentation · 2026-11-18
- Replaceable case battery
- Supported · With conditions
Starkey calls the battery replaceable. The reviewed 3.0 documents provide no battery part number or user replacement instructions.
Documentation · 2026-11-18 - Charging-case recharge time
- Under 3.5 hoursDocumentation · 2026-11-18
- Unpowered storage behavior
- Aids can power on inside the case when it has no power source. Starkey says leaving the aids in the powered charger will not overcharge them.Documentation · 2026-11-18
- Hearing-aid and receiver fit
- The Omega AI+ mRIC R needs the mRIC R version and the RIC RT needs the RIC R/RT version. Verify the style label on the bottom of the case.Documentation · 2026-11-18
- Charging indicators
- A side light confirms each aid is seated. It flashes during charging and stays lit when full. Four center lights show the case battery level. When unplugged, the center display turns off after 30 seconds.Documentation · 2026-11-18
- Charging slots
- 2 aids
Separate left and right wells are shown in the manufacturer’s diagrams.
Documentation · 2026-11-18 - Full hearing-aid charge time
- 3.5 hours
Starkey’s 3.0 QuickTIP gives the figure for compatible rechargeable hearing aids. It does not specify individual model or remaining charge.
Documentation · 2026-11-18 - Lid behavior while charging
- Charging can occur open or closed, but Starkey recommends closing the lid so its silicone insert keeps the hearing aids seated.Documentation · 2026-11-18
- Charges away from a power outlet
- SupportedDocumentation · 2026-11-18
- Quick charge duration
- 10 minutes
Turbo Charge starts automatically when the hearing-aid battery is low.
Documentation · 2026-11-18 - Runtime after quick charge
- About 3 hours after a 10-minute Turbo ChargeDocumentation · 2026-11-18
Design and everyday use
- Regional variants
- U.S. commercial codes P00014593 (mRIC R) or P00014594 (RIC R/RT). November 2026 Government Services codes P00014664 or P00014665.
The Government Services order guide is a distinct channel. Match the physical fit and current supplier code.
Documentation · 2026-11-18 - Required extras
- External power source for recharging the case, Case version marked for the exact hearing-aid styleDocumentation · 2026-11-18
- Status indicators
- Left and right hearing-aid lights, Four central case-battery indicators
Both sides blink during charging and stay on when full. See case battery lights for the Premium model.
Documentation · 2026-11-18
How to set up Starkey StarLink Premium Charger 3.0
Check the label underneath for the hearing-aid style. Plug in and charge the case before using it away from an outlet. Set each hearing aid into its matching slot and close the lid. The two side lights blink while the aids charge and stay on when they are full.
What to check before buying
Use the marked case for your exact mRIC R or RIC R/RT hearing aid. Some similar-looking hearing aids use a different charger. Aids can turn on in an unpowered case.
Match the charger to your hearing aid
Choose the version marked for your exact rechargeable receiver-in-canal style. The mRIC R and RIC R/RT cases have different charging wells. The commercial order numbers are P00014593 (mRIC R) or P00014594 (RIC R/RT).
SourceRead the lights while charging
Check the label underneath for the hearing-aid style. Plug in and charge the case before using it away from an outlet. Set each hearing aid into its matching slot and close the lid. The two side lights blink while the aids charge and stay on when they are full.
SourceAdds a battery for charging on the go
Compared with the plug-in StarLink Charger 3.0, the Premium 3.0 can recharge a pair from its own battery when you’re away from an outlet. Both offer Turbo Charge. Choose the mRIC R or RIC R/RT case that matches your hearing aids.
SourceStarkey lists the case battery as replaceable
If the case battery wears out, Starkey describes the Premium 3.0 battery as replaceable. That detail differs between generations. The instructions for the earlier StarLink Premium Charger 2.0 (mRIC R) give no replacement procedure. Check which case fits your hearing aids.
SourceRelated accessories
Other devices named in the documentation
These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.
Checking current offers…
Documentation checked Nov 18, 2026