Open StarLink Premium Custom Charger 2.0 with two compatible hearing aids seated.

Starkey StarLink Premium Custom Charger 2.0

Charge compatible Starkey hearing aids at home or away from an outlet.

What StarLink Premium Custom Charger 2.0 does

This lidded case charges two compatible Starkey hearing aids and gives you a place to store them. Its built-in battery can charge your hearing aids away from a wall outlet. The battery is sealed inside the case. When a compatible aid’s battery is low, Starkey says ten minutes of Turbo Charge can give about three hours of use.

Which hearing aids work with Starkey StarLink Premium Custom Charger 2.0?

Charging

  • Starkey Omega AI+ ITC R

    Omega AI+ ITC R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

  • Starkey Omega AI+ ITE R

    Omega AI+ ITE R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

  • Starkey Omega AI+ CIC R NW

    Omega AI+ CIC R NW. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

  • Starkey Omega AI ITC R

    original Omega AI ITC R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

  • Starkey Omega AI ITE R

    original Omega AI ITE R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.

What do you want to do?
View documented devices and setups
  • Starkey Omega AI+ ITC R · Exact model

    Charging wells for compatible custom in-ear hearing aids · charging

    Omega AI+ ITC R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    Requires additional setup

    Omega AI+ ITC R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    • Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.
    Source · 2026-11-18
  • Starkey Omega AI+ ITE R · Exact model

    Charging wells for compatible custom in-ear hearing aids · charging

    Omega AI+ ITE R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    Requires additional setup

    Omega AI+ ITE R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    • Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.
    Source · 2026-11-18
  • Starkey Omega AI+ CIC R NW · Exact model

    Charging wells for compatible custom in-ear hearing aids · charging

    Omega AI+ CIC R NW. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    Requires additional setup

    Omega AI+ CIC R NW. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    • Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.
    Source · 2026-11-18
  • Starkey Omega AI ITC R · Exact model

    Charging wells for compatible custom in-ear hearing aids · charging

    original Omega AI ITC R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    Requires additional setup

    original Omega AI ITC R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    • Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.
    Source · 2026-11-18
  • Starkey Omega AI ITE R · Exact model

    Charging wells for compatible custom in-ear hearing aids · charging

    original Omega AI ITE R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    Requires additional setup

    original Omega AI ITE R. Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.

    • Match the Custom 2.0 case to the exact rechargeable in-ear style and your supplier’s order code.
    Source · 2026-11-18

Documented features

Power and charging

Automatic hearing-aid power
When the charger has power, compatible aids turn off and start charging when seated. They turn on when removed.Documentation · 2026-11-18
Case battery is not user-replaceable

The manufacturer identifies the integrated battery as non-removable. Contact the provider if the charger needs service.

Documentation · 2026-11-18
Charging-case recharge time
2.25 hours

The technical sheet gives 2.25 hours for the Premium Custom case. The shared user guide gives a broader upper bound of under 3.5 hours.

Documentation · 2026-11-18
Unpowered storage behavior
If the aid finishes charging on battery power, the charger enters power save. Remove the aid for three seconds and reinsert it to show the light again.Documentation · 2026-11-18
Hearing-aid and receiver fit
Starkey lists this custom case for Omega AI+ ITC R, ITE R, and CIC R NW. The compatible custom styles listed in the commercial chart are ITC/HS R, ITE R and CIC R NW. Match the exact rechargeable aid and case before ordering.Documentation · 2026-11-18
Charging indicators
The two side lights show aid charging. Four center lights show the internal battery level. The aid lights can turn off when charging is complete on battery power.Documentation · 2026-11-18
Charging method
Physical charging contacts in two wells shaped for compatible rechargeable custom hearing aids.Documentation · 2026-11-18
Charging slots
2 aids

Separate left and right wells are shown in the manufacturer’s diagrams.

Documentation · 2026-11-18
Charging temperature limits
50–104 °F (10–40 °C), 10–95% relative humidity, and 70–106 kPa.Documentation · 2026-11-18
Full hearing-aid charge time
3.5 hours

Starkey’s 2.0 guide gives the figure for compatible rechargeable hearing aids. It does not specify individual model or remaining charge.

Documentation · 2026-11-18
Lid behavior while charging
You can charge with the lid open or closed. Close it for storage to keep debris out of the wells.Documentation · 2026-11-18
Portable charger battery
350 mAh for the Premium Custom 2.0 case.Documentation · 2026-11-18
Charges away from a power outlet
SupportedDocumentation · 2026-11-18
Portable full pair charges
3 full chargesDocumentation · 2026-11-18
Power connector
USB-C port on the case.

Use a power cable and adapter approved or listed by a recognized testing laboratory.

Documentation · 2026-11-18
Quick charge duration
10 minutes

Turbo Charge starts automatically when the hearing-aid battery is low.

Documentation · 2026-11-18
Runtime after quick charge
About 3 hours after a 10-minute Turbo ChargeDocumentation · 2026-11-18
USB-C power input
SupportedDocumentation · 2026-11-18

Care and fit

Cleaning materials
Use the supplied cleaning tool on the contacts. Keep water, cleaning liquids, and solvents away from the contacts.Documentation · 2026-11-18

Design and everyday use

Dimensions
92 × 63 × 56 mm in Starkey’s published order.

The table lists the same dimensions in both 2.0 columns and does not label the axes.

Documentation · 2026-11-18
Routine maintenance
Use the supplied cleaning tool to clear debris from the charging contacts. Keep the lid closed for storage in a cool, dry place. Unplug the charger if storing it for more than a week.Documentation · 2026-11-18
Operating conditions
Charge within 50–104 °F (10–40 °C) and 10–95% relative humidity. Keep the contacts dry.Documentation · 2026-11-18
Regional variants
U.S. commercial code P00009116. November 2026 government code P00010781. A May–October 2026 Government Services form shows an earlier channel-specific code.

Check the supplier’s current channel. These identifiers alone do not prove a design difference.

Documentation · 2026-11-18
Required extras
External power source for recharging the case, An approved power cable and adapter, Compatible rechargeable custom hearing aidsDocumentation · 2026-11-18
Repair and service options
Contact your hearing care provider if reseating the aids or cleaning the contacts does not help. The manufacturer instructs owners to send a defective charger for repair and keep the case assembled.Documentation · 2026-11-18
Status indicators
Left and right hearing-aid lights, Four central case-battery indicators

Both sides blink during charging and stay on when full. See case battery lights for the Premium model.

Documentation · 2026-11-18
Storage conditions
Store and transport at 14–113 °F (−10–45 °C), 10–95% relative humidity, and 70–106 kPa.Documentation · 2026-11-18
Weight
110 g

Premium Custom entry. The sheet gives 117 g separately for the standard-sized Premium case.

Documentation · 2026-11-18

How to set up Starkey StarLink Premium Custom Charger 2.0

Plug the case in with its USB-C cable to charge its internal battery. Seat each dry hearing aid in its own well without forcing it. The left and right lights blink during charging and stay lit when the aids are full. Remove both aids to turn them on.

What to check before buying

This case fits documented rechargeable custom styles. Earlier and current Starkey documents show different ordering numbers by channel. Ask the supplier to match your hearing aid style and order code.

Match the charger to your hearing aid

This is the case for compatible rechargeable custom in-ear hearing aids. Starkey sells separate cases for receiver-in-canal hearing aids. The U.S. commercial part number is P00009116.

Source

Read the lights while charging

Plug the case in with its USB-C cable to charge its internal battery. Seat each dry hearing aid in its own well without forcing it. The left and right lights blink during charging and stay lit when the aids are full. Remove both aids to turn them on.

Source

Recharges custom hearing aids away from an outlet

If you want to charge compatible Starkey custom aids on a trip, the Premium case can draw on its own battery. The comparable StarLink Custom Charger 2.0 needs external power throughout the charge. Either case offers Turbo Charge for a low hearing-aid battery.

Source

Related accessories

Other devices named in the documentation

These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.

Checking current offers…

Documentation checked Nov 18, 2026