- Accessory directory
- Hearing Aid Chargers
- Widex Charge n Clean
Widex Charge n Clean
Recharge compatible Allure hearing aids and run a drying and UV-C cycle for their earpieces.
What Charge n Clean does
Charge n Clean has two charging wells and a covered compartment for the earpieces. Closing the lid starts a 90-minute maintenance cycle while the hearing aids charge. A separate light shows when that cycle is running, paused or finished.
Which hearing aids work with Widex Charge n Clean?
Charging
- Widex Allure RIC R D
Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.
- Widex Allure BTE R D
Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.
Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.
View documented devices and setups
- Widex Allure RIC R D · Exact model
Allure ARRD1 RIC fit · charging
Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.
Requires additional setupSource · 2026-11-18Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.
- Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.
- Widex Allure BTE R D · Exact model
Allure ABRD1 BTE fit · charging
Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.
Requires additional setupSource · 2026-11-18Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.
- Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.
- Widex Allure ITE R D · Exact model
Allure ACRD1 ITE has separate WPT501 · charging
Allure ITE R D is listed under the separate WPT501.
Documented as incompatibleSource · 2026-11-18 - Widex Allure RIC R D · Exact model
Allure ARRD1 RIC fit · drying_uv_c
Place the approved earpieces inside the compartment and close the lid while the charger has power.
Requires additional setupSource · 2026-11-18Place the approved earpieces inside the compartment and close the lid while the charger has power.
- Place the approved earpieces inside the compartment and close the lid while the charger has power.
- Widex Allure BTE R D · Exact model
Allure ABRD1 BTE fit · drying_uv_c
Place the approved earpieces inside the compartment and close the lid while the charger has power.
Requires additional setupSource · 2026-11-18Place the approved earpieces inside the compartment and close the lid while the charger has power.
- Place the approved earpieces inside the compartment and close the lid while the charger has power.
Documented features
Power and charging
- Automatic hearing-aid power
- The hearing aids switch off when seated for charging and switch on after removal.Documentation · 2026-11-18
- Hearing-aid and receiver fit
- Allure RIC R D (ARRD1) and Allure BTE R D (ABRD1). Allure ITE R D has a separate WPT501 dock.Documentation · 2026-11-18
- Charging indicators
- Three steady green lights mean the associated hearing aid is fully charged. Mixed pulsing and steady green lights show progress in thirds.Documentation · 2026-11-18
- Charging method
- Fitted left and right wells charge each compatible aid independently while the dock is powered.Documentation · 2026-11-18
- Charging slots
- 2 aidsDocumentation · 2026-11-18
- Charging temperature limits
- Orange charging lights indicate the aid or surroundings are too warm. Charging can resume when temperature returns to range.Documentation · 2026-11-18
- Full hearing-aid charge time
- 4 hours
About four hours for Allure RIC R D.
Setup: Allure ARRD1 RIC fit
Documentation · 2026-11-18 - Full hearing-aid charge time
- 4.5 hours
About 4.5 hours for Allure BTE R D in the model-specific sheet.
Setup: Allure ABRD1 BTE fit
Documentation · 2026-11-18 - Electrical input requirements
- 5 V DC and USB adapter output rating 0.5–1 A. Use the supplied USB cable.Documentation · 2026-11-18
- Lid behavior while charging
- Close the lid for cleaning and drying. Opening the lid pauses care while charging may continue.Documentation · 2026-11-18
- Charging requires external power
Requires an external power source. This dock has no built-in power bank.
Documentation · 2026-11-18- Power connector
- USB-C at the charger. Use the supplied USB cable.Documentation · 2026-11-18
- Quick charge duration
- 30 minutesDocumentation · 2026-11-18
- Runtime after quick charge
- 4 hours
Approximately four hours of use after 30 minutes of charge per the exact charger guide. The guide does not specify a streaming duty cycle.
Documentation · 2026-11-18 - USB-C power input
- SupportedDocumentation · 2026-11-18
Care and fit
- Battery preparation for care
- Leave the compatible aids’ built-in rechargeable batteries in place. The dock is designed for these integrated power cells.Documentation · 2026-11-18
- Automatic care stop
- The combined cycle lasts 90 minutes. White pulsing indicates activity and steady white indicates completion.Documentation · 2026-11-18
- Care capacity
- 2
Place compatible hearing aids in their wells and both earpieces in the compartment.
Documentation · 2026-11-18 - Care chamber fit
- Compatible Allure RIC/BTE external tubes, earpieces and molds. The Widex Japan catalog says fitted custom tips and earmolds can remain attached.Documentation · 2026-11-18
- Care exclusions
- Care is intended for external tubes, earpieces and molds of the supported hearing aids. Other devices are excluded from the intended use.Documentation · 2026-11-18
- No lid safety interlock
- Documentation · 2026-11-18
- Care methods
- UV-C cleaning, Built-in dryingDocumentation · 2026-11-18
- Care cycle controls
- Place the aids in the wells and close the lid to start the combined maintenance cycle.Documentation · 2026-11-18
- Cleaning function
- Supported
UV-C cleaning of compatible external earpieces, tubes and molds during the maintenance cycle.
Documentation · 2026-11-18 - Cleaning materials
- Use a soft dry cloth on the unplugged charger. Follow the hearing-aid instructions for separate cleaning of the aids.Documentation · 2026-11-18
- Drying function
- Supported
A combined 90-minute cycle for external parts. Individual drying minutes are not stated.
Documentation · 2026-11-18 - UV cleaning cycle
- Supported
A combined 90-minute maintenance cycle. The guide does not specify separate UV-C exposure time.
Documentation · 2026-11-18
Design and everyday use
- Control accessibility
- The charge indicator lights are grouped separately for the left and right wells.Documentation · 2026-11-18
- Dimensions
- 76 × 82 × 78 mm, width × height × depth.Documentation · 2026-11-18
- Included items
- Charger, Supplied USB cableDocumentation · 2026-11-18
- Routine maintenance
- Keep the wells and compartments free of dust and dirt. Unplug before cleaning and use a soft dry cloth.Documentation · 2026-11-18
- Operating conditions
- Indoors, 50–95 °F (10–35 °C) and 20–75% relative humidity.Documentation · 2026-11-18
- Physical controls
- Charging wells, Status indicator banksDocumentation · 2026-11-18
- Regional variants
- WPC301 for Allure RIC and BTE. Norwegian exact regional package 21044362. The older MOMENT versions use different fits.Documentation · 2026-11-18
- Required extras
- Compatible Allure RIC or BTE hearing aids, Appropriate USB power sourceDocumentation · 2026-11-18
- Repair and service options
- Contact the hearing care provider for faults and authorized repair.Documentation · 2026-11-18
- Status indicators
- Separate three-light charge status per hearing aid, Red error states, Temperature-related warning indicatorsDocumentation · 2026-11-18
- Storage conditions
- Store at 50–104 °F (10–40 °C), 10–80% RH. Transport −4–140 °F (−20–60 °C), 5–90% RH.Documentation · 2026-11-18
- Warranty terms
- Two years for this model in Widex’s Japan catalog. Confirm U.S. terms with your supplier.Documentation · 2026-11-18
- Wearing and placement options
- Stationary desktop unit with hinged lid.Documentation · 2026-11-18
- Weight
- 133 g
Body weight per the exact Japanese charger listing.
Documentation · 2026-11-18
How to set up Widex Charge n Clean
Connect the supplied USB-C cable to a suitable USB power supply. Seat the left and right hearing aids in their marked wells and set the earpieces in the compartment. Close the lid. A pulsing white light indicates that the maintenance cycle is running.
What to check before buying
Choose Allure WPC301 for compatible Allure RIC and BTE aids. MOMENT has a separate version. The maintenance cycle needs the lid closed and external power, and it treats the external earpieces and tubing.
Keep the lid closed during maintenance
A pulsing white light means the cycle is running. If you open the lid, the light turns orange while care pauses. Close the lid to restart the cycle. A steady white light indicates completion.
SourceAdds a 90-minute care cycle
Compared with the open Standard Charger for compatible Widex Allure aids, Charge n Clean adds drying and UV-C while the aids charge. The care cycle takes 90 minutes. The standard dock is the simpler option if all you need is charging.
SourceNeeds room to open the lid
Charge n Clean is about three inches deep and needs clearance above it to open the lid. The smaller Standard Charger has open wells. It can be easier to reach into if your table sits beneath a low shelf. Both fit supported Allure RIC and BTE aids.
SourceRelated accessories
Checking current offers…
Documentation checked Nov 18, 2026