Allure Standard Charger holding one Widex Allure receiver-in-canal hearing aid.

Widex Standard Charger

Recharge two compatible Widex Allure hearing aids in an open desktop dock.

What Standard Charger does

The WPT301 Standard Charger has two open wells and separate progress lights for each hearing aid. The compact dock draws power over USB-C. A fully charged aid can sit in its well while the other one continues charging.

Which hearing aids work with Widex Standard Charger?

Charging

  • Widex Allure RIC R D

    Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.

  • Widex Allure BTE R D

    Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.

Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.

What do you want to do?
View documented devices and setups
  • Widex Allure RIC R D · Exact model

    Allure ARRD1 RIC fit · charging

    Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.

    Requires additional setup

    Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.

    • Use the verified charger version for Allure RIC R D (ARRD1) with the supplied cable and an appropriate USB power source.
    Source · 2026-11-18
  • Widex Allure BTE R D · Exact model

    Allure ABRD1 BTE fit · charging

    Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.

    Requires additional setup

    Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.

    • Use the verified charger version for Allure BTE R D (ABRD1) with the supplied cable and an appropriate USB power source.
    Source · 2026-11-18
  • Widex Allure ITE R D · Exact model

    Allure ACRD1 ITE has separate WPT501 · charging

    Allure ITE R D is listed under the separate WPT501.

    Documented as incompatible
    Source · 2026-11-18

Documented features

Power and charging

Automatic hearing-aid power
The hearing aids switch off when seated for charging and switch on after removal.Documentation · 2026-11-18
Hearing-aid and receiver fit
Allure RIC R D (ARRD1) and Allure BTE R D (ABRD1). Allure ITE R D has a separate WPT501 dock.Documentation · 2026-11-18
Charging indicators
Three steady green lights mean the associated hearing aid is fully charged. Mixed pulsing and steady green lights show progress in thirds.Documentation · 2026-11-18
Charging method
Fitted drop-in wells. Model WPT301 radio operates at 6.78 MHz. Exact coupling method is not named in the guide.Documentation · 2026-11-18
Charging slots
2 aidsDocumentation · 2026-11-18
Charging temperature limits
Amber indicators show charging paused due to the hearing aid’s temperature. Wait for the temperature to return to the allowable range.Documentation · 2026-11-18
Full hearing-aid charge time
4 hours

About four hours for Allure RIC R D.

Setup: Allure ARRD1 RIC fit

Documentation · 2026-11-18
Full hearing-aid charge time
4.5 hours

About 4.5 hours for Allure BTE R D in the model-specific sheet.

Setup: Allure ABRD1 BTE fit

Documentation · 2026-11-18
Electrical input requirements
5 V DC at 500 mA. Manufacturer requires the supplied cable and a suitable power adapter with USB-A socket.Documentation · 2026-11-18
Charging requires external power

Requires an external power source. This dock has no built-in power bank.

Documentation · 2026-11-18
Power bank use
The manufacturer’s setup precautions explicitly apply to charging with an external power bank. Use the approved cable and compatible power supply.Documentation · 2026-11-18
Power connector
USB-C at the charger. Use the supplied USB cable.Documentation · 2026-11-18
Quick charge duration
30 minutesDocumentation · 2026-11-18
Runtime after quick charge
4 hours

Approximately four hours of use after 30 minutes of charge per the exact charger guide. The guide does not specify a streaming duty cycle.

Documentation · 2026-11-18
USB-C power input
SupportedDocumentation · 2026-11-18

Care and fit

No drying function

Widex lists integrated drying on Charge n Clean separately.

Documentation · 2026-11-18
No UV cleaning cycle

Widex lists integrated UV-C on Charge n Clean separately.

Documentation · 2026-11-18

Design and everyday use

Control accessibility
The charge indicator lights are grouped separately for the left and right wells.Documentation · 2026-11-18
Dimensions
62 × 44 × 42 mm, width × height × depth.Documentation · 2026-11-18
Included items
Charger, Supplied USB cableDocumentation · 2026-11-18
Routine maintenance
Unplug, then wipe the charger with a soft dry cloth. Keep the wells free of dust.Documentation · 2026-11-18
Operating conditions
Indoor use, 32–86 °F (0–30 °C) and 10–95% relative humidity.Documentation · 2026-11-18
Physical controls
Charging wells, Status indicator banksDocumentation · 2026-11-18
Regional variants
WPT301 for Allure RIC and BTE. Norwegian Allure RIC parts list 21023446. Other regional kit numbers differ.Documentation · 2026-11-18
Required extras
Compatible Allure RIC or BTE hearing aids, Appropriate USB power sourceDocumentation · 2026-11-18
Repair and service options
Contact the hearing care provider for faults and authorized repair.Documentation · 2026-11-18
Status indicators
Separate three-light charge status per hearing aid, Red error states, Temperature-related warning indicatorsDocumentation · 2026-11-18
Storage conditions
Transport and storage −4–122 °F (−20–50 °C), 10–95% relative humidity and 750–1060 mbar.Documentation · 2026-11-18
Warranty terms
Two years for this model in Widex’s Japan catalog. Confirm U.S. terms with your supplier.Documentation · 2026-11-18
Weight
74 g

Body without external accessories, per Widex Japan.

Documentation · 2026-11-18

How to set up Widex Standard Charger

Connect the supplied USB cable to a compatible power adapter. Set the dock on a stable surface and seat both hearing aids. Check the green lights. Hold the hearing aid body when removing it to avoid pulling on the wire or tube.

What to check before buying

Choose WPT301 for supported Allure RIC or BTE aids. The Allure ITE has its own WPT501 charger. This dock needs an external power source and has no built-in drying or UV-C cycle.

Check the lights before leaving the dock

Each well has three indicators. Three steady green lights mean that aid is fully charged. If the lights flash red after reseating the aid, follow the guide’s troubleshooting or contact the provider.

Source

Takes up less room on a nightstand

The Standard Charger is about 2.4 inches wide and 1.7 inches deep. It takes up less space than the Charge n Clean and keeps the wells open for easy access. Both versions fit the same documented Allure RIC and BTE models.

Source

Offers charging alone

If you just want to recharge your compatible Widex Allure RIC or BTE aids, the Standard Charger has open wells for that job. For the same supported models, the Charge n Clean adds a 90-minute drying and UV-C cycle during charging.

Source

Related accessories

Checking current offers…

Documentation checked Nov 18, 2026