- Accessory directory
- Hearing Aid Chargers
- ReSound Premium Charger
ReSound Premium Charger
Recharge a compatible pair at a wall outlet or use the case’s built-in battery on the go.
What Premium Charger does
ReSound’s Premium Charger is a hinged case with two charging bays and a built-in battery. ReSound rates a fully charged case for at least three full charges of two compatible hearing aids away from a wall outlet. Five lights just inside the lid show the battery level of the lower-charged hearing aid, and three rear lights show the case battery level.
Which hearing aids work with ReSound Premium Charger?
Charging
- ReSound One RT61-DRWC
ReSound ONE RT61-DRWC, the rechargeable 61 RIE. Use the correct charger with charging form factor 1.
- ReSound OMNIA RU61-DRWC
ReSound OMNIA RU61-DRWC, the rechargeable 61 RIE. Use the correct charger with charging form factor 1.
- ReSound OMNIA miniRIE
ReSound OMNIA RU60-DRWC miniRIE. The model datasheet marks this Premium option unavailable in Canada. Use the correct charger with charging form factor 6.
- ReSound Nexia microRIE
ReSound Nexia NX60S-DRWC. Use the correct charger with charging form factor 8.
- ReSound Vivia microRIE
ReSound Vivia VI60S-DRWC microRIE. Use the correct charger with charging form factor 8.
- ReSound Savi microRIE
ReSound Savi SA60-DRWC. ReSound calls it miniRIE; catalog label says microRIE. Use the correct charger with charging form factor 9.
Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.
View documented devices and setups
- ReSound One RT61-DRWC · Exact model
Form factor 1, compatible older 61 RIE · charging
ReSound ONE RT61-DRWC, the rechargeable 61 RIE.
Requires additional setupSource · 2026-11-18ReSound ONE RT61-DRWC, the rechargeable 61 RIE.
- Use the correct charger with charging form factor 1.
- ReSound OMNIA RU61-DRWC · Exact model
Form factor 1, compatible older 61 RIE · charging
ReSound OMNIA RU61-DRWC, the rechargeable 61 RIE.
Requires additional setupSource · 2026-11-18ReSound OMNIA RU61-DRWC, the rechargeable 61 RIE.
- Use the correct charger with charging form factor 1.
- ReSound OMNIA miniRIE · Exact model
Form factor 6, OMNIA miniRIE · charging
ReSound OMNIA RU60-DRWC miniRIE. The model datasheet marks this Premium option unavailable in Canada.
Requires additional setupSource · 2026-11-18ReSound OMNIA RU60-DRWC miniRIE. The model datasheet marks this Premium option unavailable in Canada.
- Use the correct charger with charging form factor 6.
- ReSound Nexia microRIE · Exact model
Form factor 8, compatible rechargeable microRIE · charging
ReSound Nexia NX60S-DRWC.
Requires additional setupSource · 2026-11-18ReSound Nexia NX60S-DRWC.
- Use the correct charger with charging form factor 8.
- ReSound Vivia microRIE · Exact model
Form factor 8, compatible rechargeable microRIE · charging
ReSound Vivia VI60S-DRWC microRIE.
Requires additional setupSource · 2026-11-18ReSound Vivia VI60S-DRWC microRIE.
- Use the correct charger with charging form factor 8.
- ReSound Savi microRIE · Exact model
Form factor 9, Savi miniRIE · charging
ReSound Savi SA60-DRWC. ReSound calls it miniRIE; catalog label says microRIE.
Requires additional setupSource · 2026-11-18ReSound Savi SA60-DRWC. ReSound calls it miniRIE; catalog label says microRIE.
- Use the correct charger with charging form factor 9.
- ReSound Sensia microRIE · Exact model
Form factor 8, compatible rechargeable microRIE · charging
ReSound Sensia rechargeable microRIE.
Requires additional setupSource · 2026-11-18ReSound Sensia rechargeable microRIE.
- Use the correct charger with charging form factor 8.
- ReSound Sensia microRIE Bimodal · Exact model
Form factor 8, compatible rechargeable microRIE · charging
ReSound Sensia microRIE Bimodal hearing-aid side. The chart does not say the charger can charge a Cochlear processor.
Requires additional setupSource · 2026-11-18ReSound Sensia microRIE Bimodal hearing-aid side. The chart does not say the charger can charge a Cochlear processor.
- Use the correct charger with charging form factor 8.
- ReSound Nexia 61 · Exact model
Current generic charger guide · charging
This Nexia RIE model uses a disposable zinc-air battery.
Documented as incompatibleSource · 2026-11-18 - ReSound Nexia 62 · Exact model
Current generic charger guide · charging
This Nexia RIE model uses a disposable zinc-air battery.
Documented as incompatibleSource · 2026-11-18 - ReSound Nexia ITC · Exact model
Current generic charger guide · charging
This rechargeable custom model requires its own Custom Charger.
Documented as incompatibleSource · 2026-11-18 - ReSound Nexia ITE · Exact model
Current generic charger guide · charging
This rechargeable custom model requires its own Custom Charger.
Documented as incompatibleSource · 2026-11-18 - ReSound Sensia ITE Rechargeable · Exact model
Current generic charger guide · charging
This rechargeable custom model requires its own Custom Charger.
Documented as incompatibleSource · 2026-11-18 - ReSound Sensia ITC Rechargeable · Exact model
Current generic charger guide · charging
This rechargeable custom model requires its own Custom Charger.
Documented as incompatibleSource · 2026-11-18 - ReSound Nexia BTE 77 · Exact model
Current generic charger guide · charging
This Nexia BTE style uses a dedicated Desktop Charger insert.
Documented as incompatibleSource · 2026-11-18 - ReSound Nexia BTE 88 · Exact model
Current generic charger guide · charging
This Nexia BTE style uses a dedicated Desktop Charger insert.
Documented as incompatibleSource · 2026-11-18
Documented features
Power and charging
- Automatic hearing-aid power
- Compatible aids normally turn on when removed; an unplugged case in standby or with a depleted battery is an exception.
If auto-on fails after standby, the guide says to press the hearing-aid button for five seconds.
Documentation · 2026-11-18 - Case battery is not user-replaceable
The built-in case battery cannot be replaced per the guide. Consult the provider for service.
Documentation · 2026-11-18- Charging-case recharge time
- 3.5 hours
Maximum for the described 2,600 mAh case, depending on initial battery state; the newer 3,100 mAh guide does not establish its clock time.
Setup: Earlier US charger guide
Documentation · 2026-11-18 - Unpowered storage behavior
- Unplugged standby after more than 24 hours with aids inside; depletion during charging also stops auto-on.
Remove and manually power on a hearing aid if needed. The guide reports 12 months without hearing aids and does not quantify drain with them inserted.
Documentation · 2026-11-18 - Hearing-aid and receiver fit
- CFF 8 fits rechargeable microRIE models of Sensia, Sensia Bimodal, Vivia and Nexia. Savi miniRIE uses CFF 9; OMNIA miniRIE uses CFF 6. Older rechargeable ONE and OMNIA 61 RIEs use the appropriate CFF 1 version.
Match the number on the insert and package. Across regional charts and model datasheets, form factors have physical limits; unrestricted earmold, wire and sports-lock clearance is unverified.
Documentation · 2026-11-18 - Charging indicators
- Aids blink slowly while charging and stay steady when full. Five front lights show the lower-charged aid briefly. The rear lights show case charge; a blinking red light signals low case battery.
If neither aid indicates charging, reseat the aids and check power.
Documentation · 2026-11-18 - Charging method
- Inductive charging
The charging insert physically positions the hearing aid. USB-C powers the charger and is not the interface to the aid.
Documentation · 2026-11-18 - Charging slots
- 2 aids
Two pictured color-coded wells, one for each side.
Documentation · 2026-11-18 - Charging temperature limits
- 5–35 °C (41–95 °F) recommended in the newer guide.
The older US FAQ specifies 5–40 °C as the charger and aid range. Refer to the supplied guide for the actual kit.
Documentation · 2026-11-18 - Full hearing-aid charge time
- 3.5 hours
Generic charger guide in recommended operating conditions; actual duration depends on battery state and aid. The model-specific rates below come from separate datasheets.
Setup: Current generic charger guide
Documentation · 2026-11-18 - Full hearing-aid charge time
- 3 hours
Nexia NX60S-DRWC datasheet below 35 °C, depending on initial battery state.
Setup: Form factor 8, compatible rechargeable microRIE
Documentation · 2026-11-18 - Full hearing-aid charge time
- 3 hours
OMNIA miniRIE datasheet at less than 40 °C, depending on initial battery state.
Setup: Form factor 6, OMNIA miniRIE
Documentation · 2026-11-18 - Full hearing-aid charge time
- 3 hours
ONE RT61-DRWC datasheet below 40 °C, depending on initial battery state.
Setup: Form factor 1, compatible older 61 RIE
Documentation · 2026-11-18 - Electrical input requirements
- 5 V USB from the approved supply.
No universal peak current or USB Power Delivery profile verified for the documented regional kits.
Documentation · 2026-11-18 - Lid behavior while charging
- Seat dry aids to start charging and open the lid to see the indicators.
Neither guide/chart specifies unrestricted custom earmold clearance or a required lid state while charging. Take care with fitted sports locks.
Documentation · 2026-11-18 - Portable charger battery
- 3.7 V, 3,100 mAh
Current generic guide edition. The specification is not interchangeable with the 2,600 mAh older charger edition.
Setup: Current generic charger guide
Documentation · 2026-11-18 - Portable charger battery
- 3.5–3.7 V, 2,600 mAh
Older US model documentation. Nexia US professional page also gives 2,600 mAh.
Setup: Earlier US charger guide
Documentation · 2026-11-18 - Charges away from a power outlet
- SupportedDocumentation · 2026-11-18
- Portable full pair charges
- 3 pair charges
GN’s stated minimum for a fully charged case charging two aids without mains power.
Setup: Built-in case battery, unplugged
Documentation · 2026-11-18 - Power adapter included
- Supported · With conditions
Supplied in the documented manufacturer setup; replacement packaging can differ.
Setup: Manufacturer-supplied kit
Documentation · 2026-11-18 - Power connector
- USB-C at the charger; use the supplied cable and adapter.
The charger guide specifies the approved cable and wall adapter rather than generic substitute parts.
Documentation · 2026-11-18 - USB-C power input
- Supported
The documented recent variants use USB-C at the charger.
Documentation · 2026-11-18 - Wireless case charging
- Recharge the case with the approved USB cable and wall adapter.
The case power instructions describe wired input; inductive charging applies to the aids.
Documentation · 2026-11-18
Care and fit
- Cleaning materials
- Dry soft cloth and clean cotton swab; no liquid cleaners or sharp objects.
These materials clean the charger itself. Dry the hearing aids before inserting them.
Documentation · 2026-11-18 - No drying function
GN instructs users to dry the hearing aids before docking; the charger has charging-only operating modes.
Documentation · 2026-11-18- No UV cleaning cycle
The manual and product chart describe a charging-only device with no UV treatment cycle.
Documentation · 2026-11-18
Design and everyday use
- Control accessibility
- Blue left and red right wells
The case has visual color cues. The guide does not establish tactile marking, audible feedback or one-handed use.
Documentation · 2026-11-18 - Dimensions
- 99.5 × 35.9 × 68.2 mm
Dimensions in the generic guide’s published order. The axes are not labeled; measure clearance with the lid open when applicable.
Setup: Current generic charger guide
Documentation · 2026-11-18 - Dimensions
- 99.4 × 35 × 67.5 mm
Measurements in the earlier US guide’s published order.
Setup: Earlier US charger guide
Documentation · 2026-11-18 - Included items
- Charger, Charging cable, Wall adapter
Published manual configuration assumes manufacturer-supplied cable and wall adapter. Verify seller pack contents. The case battery is built in.
Documentation · 2026-11-18 - Routine maintenance
- Unplug it; wipe with a dry soft cloth and clean the bays with a dry cotton swab.
Keep it dry. Avoid sharp objects, liquids and blowing air into the socket.
Documentation · 2026-11-18 - Operating conditions
- 5–35 °C (41–95 °F), up to 90% RH noncondensing; 700–1,060 hPa
Latest guide gives recommended ambient conditions. Use on a flat, dry, heat-resistant surface.
Documentation · 2026-11-18 - Physical controls
- Hinged lid, Automatic start on seating aids
Open the lid to insert or remove the hearing aids. The charger has no documented mode switch.
Documentation · 2026-11-18 - Regional variants
- US examples from the GN declaration: CFF 8 22944600 or 23086600, CFF 6 22358700, CFF 9 23373800. GB 23086700 and EU 23086800 are examples for CFF 8. Multiple hardware and packaging variants use C-1.
Part numbers identify specific GN kits and regions. Check the regional product chart and literal seller contents.
Documentation · 2026-11-18 - Required extras
- Compatible rechargeable hearing aids
Check the CFF and obtain the correct manufacturer power adapter if the exact replacement pack omits it.
Documentation · 2026-11-18 - Repair and service options
- Contact the hearing care professional for power parts, troubleshooting or warranty replacement.
The manufacturer can substitute a new or refurbished equivalent under the warranty terms. Do not open the charger.
Documentation · 2026-11-18 - Status indicators
- Hearing-aid LEDs, Five front hearing-aid charge lights, Three rear case battery lights
The hearing-aid light is the primary charging confirmation.
Documentation · 2026-11-18 - Storage conditions
- −25 to +5 °C; 5–35 °C up to 90% RH noncondensing; above 35 °C to 60 °C (140 °F) at up to 50 hPa water vapor pressure
Transport/storage ranges and humidity or vapor-pressure limits are conditional. See the guide for warm-up and cooldown.
Documentation · 2026-11-18 - Weight
- 145 g
Charger weight from the technical specifications; cable and adapter weight are separately unspecified.
Documentation · 2026-11-18
How to set up ReSound Premium Charger
Plug the supplied power adapter into a wall outlet and connect the supplied cable. Set the charger on a flat, heat-resistant surface. Put dry hearing aids in the color-coded bays, blue for left and red for right. Place the receivers in the center pocket. The hearing-aid lights blink slowly while charging and stay on when full.
What to check before buying
Match the charging form factor (CFF) inside the case to your exact hearing aid. If the case is unplugged for more than 24 hours with the aids inside or the internal battery runs out, the aids may need to be turned on manually.
Match the number before ordering
Check the charging form factor marked inside the charging bay and on the package. It identifies the well shape for your hearing aid. If the packaging has no number, ask the provider to verify the insert and the exact hearing-aid style.
SourceCheck power and reseat the hearing aids
If a hearing aid does not start blinking in its bay, lift it out and seat it again. Check that the approved cable and adapter are fully connected. Contact your provider if the cable is damaged or the problem persists.
SourceCan charge a pair away from an outlet
If your Sensia, Vivia or Nexia microRIE hearing aids take a form factor 8 charger, both the Premium Charger and the ReSound Standard Charger come in that size. The reason to choose the Premium for travel is its built-in battery. The Standard needs external power each time you charge.
SourceNexia behind-the-ear hearing aids need a different charger
The Premium Charger is a lidded case for compatible receiver-in-ear hearing aids. If you wear Nexia 77 BTE or 88 Power BTE hearing aids, the ReSound Desktop Charger comes in versions with charging slots for those models. Match the dock to your exact model.
SourceRelated accessories
Other devices named in the documentation
These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.
Checking current offers…
Documentation checked Nov 18, 2026