ReSound Multi Mic

TV streamers

Hear a conversation, a hearing loop, or sound from a TV with an analog output through compatible hearing aids.

What Multi Mic does

Clip the original ReSound Multi Mic onto a speaker or place it flat to hear people around a table. It sends that sound to compatible hearing aids. You can also connect a TV or other device with an analog audio output, listen to a hearing loop or attach an optional FM receiver.

Which hearing aids work with ReSound Multi Mic?

Microphone audio

  • Jabra Enhance Pro PM61-DRW
  • Jabra Enhance Pro PM61-DRWC
  • Jabra Enhance Pro PM62-DRW
  • Jabra Enhance Pro 20 MicroRIE 60S
  • Jabra Enhance Pro 20 RIE 62
  • ReSound Enzo Q BTE 88
View documented devices and setups

TV audio

  • Jabra Enhance Pro PM61-DRW

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply. Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids. Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.

  • Jabra Enhance Pro PM61-DRWC

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply. Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids. Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.

  • Jabra Enhance Pro PM62-DRW

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply. Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids. Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.

  • Jabra Enhance Pro 20 MicroRIE 60S

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply. Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids. Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.

  • Jabra Enhance Pro 20 RIE 62

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply. Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids. Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.

  • ReSound Enzo Q BTE 88

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply. Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids. Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.

View documented devices and setups

Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.

What do you want to do?
View documented devices and setups
  • Jabra Enhance Pro PM61-DRW · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRW · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRW · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRW · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRW · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRWC · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRWC · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRWC · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRWC · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRWC · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • Jabra Enhance Pro PM62-DRW · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro PM62-DRW · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro PM62-DRW · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • Jabra Enhance Pro PM62-DRW · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • Jabra Enhance Pro PM62-DRW · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 MicroRIE 60S · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro 20 MicroRIE 60S · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro 20 MicroRIE 60S · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 MicroRIE 60S · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 MicroRIE 60S · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 RIE 62 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro 20 RIE 62 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • Jabra Enhance Pro 20 RIE 62 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 RIE 62 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 RIE 62 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 88 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Enzo Q BTE 88 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Enzo Q BTE 88 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 88 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 88 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 98 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Enzo Q BTE 98 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Enzo Q BTE 98 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 98 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 98 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound Key RIE 61 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Key RIE 61 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Key RIE 61 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound Key RIE 61 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound Key RIE 61 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound Key RIE 62 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Key RIE 62 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Key RIE 62 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound Key RIE 62 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound Key RIE 62 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 61 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 61 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 61 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 61 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 61 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 62 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 62 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 62 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 62 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 62 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 61 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 61 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 61 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 61 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 61 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 62 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 62 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 62 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 62 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 62 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 77 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 BTE 77 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 BTE 77 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 77 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 77 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 88 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 BTE 88 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 BTE 88 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 88 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 88 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 61 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 RIE 61 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 RIE 61 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 61 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 61 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 62 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 RIE 62 · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound LiNX2 RIE 62 · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 62 · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 62 · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRW · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRW · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRW · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRW · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRW · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRWC · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRWC · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRWC · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRWC · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRWC · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound Omnia RU62-DRW · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Omnia RU62-DRW · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound Omnia RU62-DRW · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound Omnia RU62-DRW · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound Omnia RU62-DRW · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound One RT61-DRW · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound One RT61-DRW · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound One RT61-DRW · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound One RT61-DRW · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound One RT61-DRW · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound One RT61-DRWC · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound One RT61-DRWC · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound One RT61-DRWC · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound One RT61-DRWC · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound One RT61-DRWC · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • ReSound One RT62-DRW · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound One RT62-DRW · Exact model

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Documented support
    Source · 2026-11-18
  • ReSound One RT62-DRW · Exact model

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • ReSound One RT62-DRW · Exact model

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • ReSound One RT62-DRW · Exact model

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • Jabra Enhance Pro 10 · Family

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Family-level evidence. Confirm your exact hearing-aid model before buying.

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    Source · 2026-11-18
  • Jabra Enhance Pro 10 · Family

    Direct 2.4 GHz stream with the mic flat on a table · microphone_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Family-level evidence. Confirm your exact hearing-aid model before buying.

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    Source · 2026-11-18
  • Jabra Enhance Pro 10 · Family

    3.5 mm wired source input; ReSound 2.4 GHz to the aids · wired_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Family-level evidence. Confirm your exact hearing-aid model before buying.

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Use an audio device with a 3.5 mm analog output and a compatible cable.
    Source · 2026-11-18
  • Jabra Enhance Pro 10 · Family

    Built-in telecoil input; ReSound 2.4 GHz to the aids · telecoil_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Family-level evidence. Confirm your exact hearing-aid model before buying.

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Select the built-in telecoil mode and stay within the active hearing-loop field.
    Source · 2026-11-18
  • Jabra Enhance Pro 10 · Family

    External Europlug FM receiver; ReSound 2.4 GHz to the aids · fm_audio

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    Requires additional setup

    Family-level evidence. Confirm your exact hearing-aid model before buying.

    Original GN ReSound direct 2.4 GHz accessory pairing. Use a supported aid and the selected source. Physical mode and hearing-aid fitting conditions apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Attach an appropriate Europlug FM receiver for the venue transmitter.
    Source · 2026-11-18
  • Cochlear Nucleus® 7 · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Nucleus 7. Only exact compatible wireless receiving styles. Pair the original SM-2P and check any necessary processor or hearing-aid firmware first.

    Requires additional setup

    Nucleus 7. Only exact compatible wireless receiving styles. Pair the original SM-2P and check any necessary processor or hearing-aid firmware first.

    • Use an exact supported direct or bimodal Cochlear setup, with processor software checked by your provider.
    Source · 2026-11-18
  • Cochlear Nucleus® 6 Sound Processor · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Nucleus 6 with compatible processor software. Only exact compatible wireless receiving styles. Pair the original SM-2P and check any necessary processor or hearing-aid firmware first.

    Requires additional setup

    Nucleus 6 with compatible processor software. Only exact compatible wireless receiving styles. Pair the original SM-2P and check any necessary processor or hearing-aid firmware first.

    • Use an exact supported direct or bimodal Cochlear setup, with processor software checked by your provider.
    Source · 2026-11-18
  • Cochlear Nucleus Kanso · Exact model

    Direct 2.4 GHz stream using the worn clip · microphone_audio

    Original Kanso with compatible processor software. Only exact compatible wireless receiving styles. Pair the original SM-2P and check any necessary processor or hearing-aid firmware first.

    Requires additional setup

    Original Kanso with compatible processor software. Only exact compatible wireless receiving styles. Pair the original SM-2P and check any necessary processor or hearing-aid firmware first.

    • Use an exact supported direct or bimodal Cochlear setup, with processor software checked by your provider.
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRW · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • Jabra Enhance Pro PM61-DRWC · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • Jabra Enhance Pro PM62-DRW · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 MicroRIE 60S · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • Jabra Enhance Pro 20 RIE 62 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 88 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound Enzo Q BTE 98 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound Key RIE 61 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound Key RIE 62 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 61 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX 3D RIE 62 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 61 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX Quattro RIE 62 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 77 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX2 BTE 88 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 61 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound LiNX2 RIE 62 · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRW · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound OMNIA RU61-DRWC · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound Omnia RU62-DRW · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound One RT61-DRW · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound One RT61-DRWC · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • ReSound One RT62-DRW · Exact model

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18
  • Jabra Enhance Pro 10 · Family

    TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing · tv_audio

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    Requires additional setup

    Family-level evidence. Confirm your exact hearing-aid model before buying.

    GN documents the analog TV as a line-in source. The existing receiver compatibility and pairing conditions still apply.

    • Pair this original SM-2P to an available original 2.4 GHz streaming channel on the compatible hearing aids.
    • Connect a television with a compatible analog audio output to the microphone’s 3.5 mm input using the supplied cable.
    Source · 2026-11-18

Documented features

Listening and control

Mute accessory microphone
Supported

Press Mute to stop the outgoing stream. The sensor also briefly mutes a detected fall from about 30 inches or more.

Documentation · 2026-11-18
Audio bandwidth
100–8,000 Hz, with 350–8,000 Hz for telecoil.

Manufacturer frequency range. The sheet lists ±3 dB for the primary measurement.

Documentation · 2026-11-18
Automatic mode switching
Turns directional when worn vertically and all-around when placed flat. The inserted analog cable or FM receiver can also select its own mode.

Press the Mode button to cycle to another available input.

Documentation · 2026-11-18
Directional microphone
Supported

Wear the microphone vertically on the speaker.

Documentation · 2026-11-18
Remote-microphone runtime
11 hours

Typical from full charge in microphone mode.

Documentation · 2026-11-18
Built-in microphone count
2

The manufacturer documents 2 built-in microphones.

Documentation · 2026-11-18
Microphone modes
Vertical directional clip mode, Flat all-around table mode, Wired mono line input, Telecoil mode, FM input through optional Europlug receiver

Only one input mode at a time. FM and line-in require their physical connection.

Documentation · 2026-11-18
Noise management
Automatic directional focus in vertical mode and all-around table mode with active noise reduction.

No measured in-use cutoff or environmental benefit is claimed here.

Documentation · 2026-11-18
Microphone placement
Clip vertically about 4–16 inches from the mouth, with the device facing the speaker’s mouth, or lay it flat near the group.

Keep the microphone openings unobstructed.

Documentation · 2026-11-18
Remote microphone
SupportedDocumentation · 2026-11-18
Stream volume control
Hardware level controls adjust audio sent by the mic. Optional compatible hearing-aid controls or apps can adjust the listening mix.

The mic’s physical volume does not change the hearing-aid microphones.

Documentation · 2026-11-18
Audio-streaming runtime
11 hours

Typical in wired line-in mode.

Setup: 3.5 mm wired source input; ReSound 2.4 GHz to the aids

Documentation · 2026-11-18
Audio-streaming runtime
7 hours

Typical from full charge in telecoil mode.

Setup: Built-in telecoil input; ReSound 2.4 GHz to the aids

Documentation · 2026-11-18
Audio-streaming runtime
10 hours

Typical from full charge when using an FM receiver.

Setup: External Europlug FM receiver; ReSound 2.4 GHz to the aids

Documentation · 2026-11-18
Table microphone mode
Supported

Laying the microphone flat switches it to group pickup.

Documentation · 2026-11-18
Volume control
Supported

Physical plus and minus change only the streamed signal. The Microphone and FM volume settings can be locked independently of line-in and telecoil.

Documentation · 2026-11-18

Connections

Analog audio input
Supported

The 3.5 mm input mixes stereo audio down to mono.

Documentation · 2026-11-18
Companion app control
In the compatible ReSound hearing-aid app, select the paired Multi Mic streaming program.

App use is optional. It is a receiving-side selection and does not give this mic Plus features.

Documentation · 2026-11-18
Manufacturer-stated audio latency
20 ms

GN quoted transmission to the hearing instrument. It is not measured from the TV or room all the way to the ear.

Documentation · 2026-11-18
No audio passthrough

The complete port diagram identifies no wired audio output. The accessory sends sound onward wirelessly to a compatible receiver.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
No Auracast broadcasting

Original uses proprietary 2.4 GHz accessory pairing. Auracast is a separate feature of Multi-Mic+.

Documentation · 2026-11-18
Automatic streaming start
Inserting the audio cable selects line-in automatically. Start listening with the paired hearing-aid controls or a supported app.

Selecting an input at the accessory is separate from starting the hearing-aid stream.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
Bilateral and unilateral use
Direct streams reach a compatible paired set of hearing aids, with certain older documented Cochlear bimodal combinations.

The original Multi Mic output is mixed mono for the line input. Do not treat two receiving ears as stereo.

Documentation · 2026-11-18
No coaxial digital input

No coaxial digital input. The other audio socket is for an external FM receiver.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
Computer audio
Connect the computer’s analog headphone output to the line-in port.

Hear meeting audio through the aids. Use the computer or a separate microphone for your own voice.

Documentation · 2026-11-18
Connection priority
A Phone Clip+ or Phone Now call can interrupt the mic stream. The connected stream resumes after the call.

This does not establish the same outcome for every modern native Bluetooth call.

Documentation · 2026-11-18
No HDMI ARC input

No HDMI ARC socket. Use the TV’s analog audio output.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
No HDMI eARC input

No HDMI eARC socket on the accessory.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
Link to hearing aids
ReSound proprietary 2.4 GHz accessory link

Not standard Bluetooth phone pairing. The GN/Cochlear chart has exact bimodal configuration restrictions.

Documentation · 2026-11-18
Accessory-to-hearing-aid range
25 m

Up to about 80 feet in clear line of sight. Walls, other objects and body position can shorten range.

Documentation · 2026-11-18
Audio input selection
Microphone, telecoil, line-in and FM. The physical Mode button cycles among available inputs, and the last connected analog or FM input can be selected automatically.

Use an attached cable or external receiver for line-in or FM, respectively.

Documentation · 2026-11-18
Analog input details
3.5 mm mixed-mono input, rated up to 500 mV RMS in the original datasheet.

Use an analog headphone or line output, starting at a comfortable level.

Setup: 3.5 mm wired source input; ReSound 2.4 GHz to the aids

Documentation · 2026-11-18
No optical audio input

Complete hardware diagrams show an analog 3.5 mm audio input and no optical jack.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
Hearing-aid pairing method
Turn on the Multi Mic, restart the disabled aids within the 20-second pairing window, and wait for the pairing tone. Press the recessed button once, twice or three times to select a free channel.

Some newer rechargeable aids use a charging dock or their power control to restart. Match the model and exact documented fit.

Documentation · 2026-11-18
No hands-free calling through this accessory

No dedicated phone input for two-way calls or outgoing microphone path. ReSound Phone Clip+ can pause or resume the accessory stream.

Documentation · 2026-11-18
Professional setup
Pair through hearing-aid controls, or use fitting software where supported.

A hearing care professional can check fitting permissions, update exact hearing aids and confirm crossed brand support.

Documentation · 2026-11-18
Receiver requirements
Compatible integrated ReSound wireless hearing-aid receiver or specifically documented bimodal processor setup.

An external Europlug FM receiver is needed only for FM input. The hearing-aid output stays proprietary 2.4 GHz.

Documentation · 2026-11-18
Reconnection behavior
The original can resume automatically if the paired aids re-enter range in less than five minutes.

After a longer interruption use the aid’s or app’s stream control again.

Documentation · 2026-11-18
Simultaneous listeners
GN says the original microphone can pair with any number of hearing instruments.

Its tech sheet says multiple instruments can receive. It gives no tested numeric simultaneous-listener count. Individual hearing aids can pair to up to three streaming-device slots, not mix three microphones.

Documentation · 2026-11-18
No stereo streaming

Manufacturer specifies mixed mono at the analog line input. Bilateral reception does not turn it into stereo.

Setup: 3.5 mm wired source input; ReSound 2.4 GHz to the aids

Documentation · 2026-11-18
Stopping TV streaming
Use the paired hearing-aid stream control or switch the microphone off. Disconnecting the cable disables the line-in source.

The source selection or aid program may also be changed during listening.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
Telecoil use
Internal telecoil receives a room loop without an additional body receiver.

Typical seven-hour accessory runtime in loop mode. This is an accessory input, separate from a telecoil in the aid.

Setup: Built-in telecoil input; ReSound 2.4 GHz to the aids

Documentation · 2026-11-18
Telecoil input
SupportedDocumentation · 2026-11-18
TV audio streaming
Supported · With conditions

Connect the TV analog audio output to the included 3.5 mm line-in cable and select Multi Mic streaming on compatible hearing aids. The line-in source is mono.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
Required TV settings
Select the TV’s compatible headphone or analog audio output and check that it is playing. Use the TV audio settings to unmute and set a comfortable level only if needed.

The accessory automatically selects line-in when the cable is inserted. Its analog input cannot decode a digital TV output.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
Independent TV stream volume
Use the accessory’s volume buttons, or a supported receiving control, to change the sound in your hearing aids.

This adjusts the streamed signal. The TV controls the room speakers and whether the chosen analog output shares their volume.

Setup: TV analog output to 3.5 mm line-in with original 2.4 GHz hearing-aid pairing

Documentation · 2026-11-18
No USB audio input

Micro-USB is the power connector. Source audio uses the distinct analog, telecoil or FM inputs.

Documentation · 2026-11-18
Wireless transmission delay
20 ms

GN lists the transmission delay to the hearing instrument as 20 ms.

Documentation · 2026-11-18

Power and charging

Accessory battery is not user-replaceable
Documentation · 2026-11-18
Accessory battery type
Internal rechargeable battery.

Manufacturer sources did not specify an exact capacity in the reviewed original sheet.

Documentation · 2026-11-18
Accessory charge time
3 hours

Approximately three hours from empty. Charge for at least three hours before first use per original manual.

Documentation · 2026-11-18
Rechargeable accessory battery
SupportedDocumentation · 2026-11-18
Battery status reporting
North American manual uses a red charge light with green full-charge indication, plus an orange low-battery warning during operation.

Shared FAQ wording varies. Check the product-specific pattern.

Documentation · 2026-11-18
Electrical input requirements
Use the supplied and approved GN wall power adapter.

A rated usable voltage or current for unspecified external supplies was not verified.

Documentation · 2026-11-18
Power adapter included
Supported

Shown in the documented original package. Confirm contents on used stock.

Documentation · 2026-11-18
Power connector
Micro-USB input for charging.Documentation · 2026-11-18
No USB-C power input

Original SM-2P uses micro-USB for power. TV audio enters through the separate 3.5 mm input.

Documentation · 2026-11-18

Design and everyday use

Control accessibility
Physical power, stream volume and mute, with lights for selected input and mode. Choose the recessed pairing button using a pen tip.

Pairing and stream activation can give audible feedback in compatible aids.

Documentation · 2026-11-18
Dimensions
28.5 × 61 × 22 mm (W × H × D)

The original GN presentation lists 61 × 28.5 × 22 mm in its size table.

Documentation · 2026-11-18
Included items
Wall power adapter, Micro-USB charging cable, 3.5 mm audio cable, Lanyard, Carry pouch

The FM receiver is a separate accessory.

Documentation · 2026-11-18
Routine maintenance
Clean the case and ports gently with a damp cloth. Avoid solvents, immersion, opening the unit or charging it while worn.

Use the original supplied power equipment.

Documentation · 2026-11-18
Operating conditions
32–113°F (0–45°C) for operation and charging.

In colder environments GN warns that battery life can decrease. Use the stated range for charging.

Documentation · 2026-11-18
Physical controls
Power button, Volume plus and minus, Mute button, Rear mode and recessed pair buttons, Clothing clip, Micro-USB, 3.5 mm line-in and Europlug receiver inputsDocumentation · 2026-11-18
Regional variants
SM-2P is the original ReSound Multi Mic. U.S. part 19080200, with separately listed AU/UK/EU variants.

Separate from Micro Mic SM-2M and Multi-Mic+ SM-3P.

Documentation · 2026-11-18
Replacement parts
GN-approved micro-USB charging cable and adapter, Matched 3.5 mm audio cable, lanyard and carry pouch

No separate battery replacement. Ask the provider for an exact current part code.

Documentation · 2026-11-18
Required extras
Compatible hearing aids and configured direct accessory streaming, Europlug FM receiver for FM mode, 3.5 mm source output for wired audio, Accessible hearing loop for telecoil mode

No separate body receiver for confirmed ReSound direct pairing. Check the exact fitting and source.

Documentation · 2026-11-18
Repair and service options
Ask a hearing care provider or authorized GN service center about fitting, repairs and older parts.

User battery changes are not supported.

Documentation · 2026-11-18
Status indicators
Green normal operation, Orange pairing and low-battery blink patterns, Mode LEDs for microphone, line-in, telecoil and FM, Separate mute/volume feedback light, Charging status red with green full-charge feedback

The UK shared FAQ uses yellow for pairing. Follow the original North America guide and actual status pattern.

Documentation · 2026-11-18
Storage conditions
−4–113°F (−20–45°C).

Keep the unit dry and keep the charging and audio ports free of debris.

Documentation · 2026-11-18
Warranty terms
12 months from original purchase against covered defects, according to the original U.S. user guide.

Policies and local rights vary. Confirm used or old-stock warranty with the seller.

Documentation · 2026-11-18
Wearing and placement options
Attached clothing clip, Lanyard, Flat on a table

Keep the top of the original device pointed toward the speaker’s mouth when clipped.

Documentation · 2026-11-18
Weight
22 gDocumentation · 2026-11-18

How to set up ReSound Multi Mic

Charge the microphone and switch it on. Restart the hearing aids after pressing the recessed pairing button behind the clip. You have 20 seconds. Press one, two or three times to choose an available streaming channel. Use the compatible app or hearing-aid program control to start the stream. Clip the microphone vertically about 4–16 inches below the speaker’s mouth or place it flat on a table.

What to check before buying

Check that the microphone is the original SM-2P and that your hearing aids support it. The original uses micro-USB and the ReSound 2.4 GHz accessory link. It has no Auracast mode. An FM transmitter needs a compatible plug-in receiver. The analog jack carries sound to your ears. For online calls, you still need your computer’s microphone or another microphone to pick up your voice. For TV sound, use a compatible analog output and a 3.5 mm cable.

Switches from one speaker to a whole table

Both the Multi Mic and the smaller ReSound Micro Mic can be worn by the person you want to hear. The difference shows up at dinner. Lay the Multi Mic flat and it switches to pickup from around the table. The Micro Mic is designed to stay with one speaker.

Source

Uses direct pairing for listeners

Listeners need hearing devices that can pair directly with the original Multi Mic over ReSound’s 2.4 GHz connection. Compared with the original, the ReSound Multi Mic+ adds another way to listen. A nearby device that supports Auracast can join the newer mic’s broadcast.

Source

Choose the microphone position for the conversation

For one speaker, clip the mic vertically about 4 to 16 inches below their mouth. For a small group, lay it flat on a table. It changes pickup automatically when you switch positions.

Source

Listen to a TV with an analog audio output

Connect the included 3.5 mm cable from your TV’s analog audio output to line-in. The microphone selects that mode automatically. Start the paired Multi Mic stream on your compatible hearing aids. Check the TV’s speaker settings if someone else wants to hear the room speakers.

Source

Check which original streaming channels are free

Original ReSound aids can remember up to three compatible streaming devices. Select a free channel when pairing. That does not mix several microphone feeds together.

Source

Companion apps

Related accessories

Other devices named in the documentation

These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.

Checking current offers…

Documentation checked Nov 18, 2026