- Accessory directory
- TV Streamers and Adapters for Hearing Aids
- Oticon TV Adapter 3.0
Oticon TV Adapter 3.0
Send television sound to compatible Oticon hearing aids and set your own listening volume.
What TV Adapter 3.0 does
Connect your TV through the optical or analog input. Choose the TV program on your paired Oticon hearing aids to listen. The adapter can also pass an optical signal to a soundbar, and several people with compatible hearing aids can listen at once.
Which hearing aids work with Oticon TV Adapter 3.0?
TV audio
- Oticon Intent miniRITE R
- Oticon Reveal miniRITE R
- Oticon Zeal
- Oticon Opn miniRITE
- Oticon Opn miniRITE-T
- Oticon Opn BTE13 PP
Choose the exact model printed on your hearing aids or paperwork. A family match does not establish support for every model in that family.
View documented devices and setups
- Oticon Intent miniRITE R · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Documented supportSource · 2026-11-17 - Oticon Reveal miniRITE R · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Documented supportSource · 2026-11-17 - Oticon Zeal · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Documented supportSource · 2026-11-17 - Oticon Opn miniRITE · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Documented supportSource · 2026-11-17 - Oticon Opn miniRITE-T · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Documented supportSource · 2026-11-17 - Oticon Opn BTE13 PP · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Documented supportSource · 2026-11-17 - Oticon Opn S BTE PP · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Documented supportSource · 2026-11-17 - Oticon Siya · Family
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
Requires additional setupSource · 2026-11-17Family-level evidence. Confirm your exact hearing-aid model before buying.
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Opn S · Family
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
Requires additional setupSource · 2026-11-17Family-level evidence. Confirm your exact hearing-aid model before buying.
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Xceed · Family
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
Requires additional setupSource · 2026-11-17Family-level evidence. Confirm your exact hearing-aid model before buying.
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Ruby · Family
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
Requires additional setupSource · 2026-11-17Family-level evidence. Confirm your exact hearing-aid model before buying.
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon More · Family
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
Requires additional setupSource · 2026-11-17Family-level evidence. Confirm your exact hearing-aid model before buying.
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Zircon · Family
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
Requires additional setupSource · 2026-11-17Family-level evidence. Confirm your exact hearing-aid model before buying.
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Real · Family
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
Requires additional setupSource · 2026-11-17Family-level evidence. Confirm your exact hearing-aid model before buying.
Confirm a compatible Oticon aid with the required built-in 2.4 GHz radio and pair it directly to the accessory.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Own ITE FS · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Choose the original Oticon Own ITC, ITE half-shell or ITE full-shell with the optional 2.4 GHz radio.
Requires additional setupSource · 2026-11-17Choose the original Oticon Own ITC, ITE half-shell or ITE full-shell with the optional 2.4 GHz radio.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Own ITE HS · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Choose the original Oticon Own ITC, ITE half-shell or ITE full-shell with the optional 2.4 GHz radio.
Requires additional setupSource · 2026-11-17Choose the original Oticon Own ITC, ITE half-shell or ITE full-shell with the optional 2.4 GHz radio.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Own ITC · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Choose the original Oticon Own ITC, ITE half-shell or ITE full-shell with the optional 2.4 GHz radio.
Requires additional setupSource · 2026-11-17Choose the original Oticon Own ITC, ITE half-shell or ITE full-shell with the optional 2.4 GHz radio.
- Confirm the exact hearing aid has the required Oticon 2.4 GHz radio.
- Oticon Own CIC · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Original Own IIC and CIC are absent from the wireless accessory rows because these styles do not have the required 2.4 GHz radio.
Documented as incompatibleSource · 2026-11-17 - Oticon Own IIC · Exact model
Compatible Oticon hearing aids paired to the TV Adapter 3.0 · tv_audio
Original Own IIC and CIC are absent from the wireless accessory rows because these styles do not have the required 2.4 GHz radio.
Documented as incompatibleSource · 2026-11-17
Documented features
Connections
- Analog audio input
- Supported
Includes a 3.5 mm-to-RCA adapter.
Documentation · 2026-11-18 - Companion app control
- Oticon Companion can select a paired adapter, adjust stream EQ and control surrounding volume on supported hearing aids.
The app is optional. Select the TV program through the aids or their compatible remote.
Documentation · 2026-11-17 - Supported codecs
- Optical digital stereo PCM, Optical Dolby Digital, Stereo analog RCA input
The wireless encoding is not specified in this product sheet.
Documentation · 2026-11-18 - Manufacturer-stated audio latency
- 25 ms · With conditions
Manufacturer measurement from analog input to hearing-aid speaker, with no TV processing time included.
Setup: Stereo RCA or an analog headphone output with the adapter
Documentation · 2026-11-18 - Manufacturer-stated audio latency
- 28 ms · With conditions
Manufacturer measurement from digital stereo PCM input to hearing-aid speaker. Dolby Digital is separately specified at 45 ms.
Setup: Optical TOSLINK connection from the TV to the adapter
Documentation · 2026-11-18 - Audio passthrough
- The adapter’s optical output passes the optical input through to another device. · With conditions
The optical output is described as buffered optical input. Analog-to-optical conversion is not documented.
Setup: Optical TOSLINK connection from the TV to the adapter
Documentation · 2026-11-18 - No Auracast broadcasting
TVA3 sends its stream to paired Oticon 2.4 GHz hearing aids. Its feature and radio documentation provides no Auracast broadcast mode.
Documentation · 2026-11-18- Automatic streaming start
- The adapter begins transmitting when it detects a valid audio signal. The wearer normally selects the paired TV program to listen.Documentation · 2026-11-18
- Bilateral and unilateral use
- A compatible hearing-aid pair can receive stereo. Oticon’s pairing sequence shows both aids.
Oticon lists an unlimited number of individual pairs or aids. Mixed-model binaural behavior and mono routing were not verified.
Documentation · 2026-11-18 - Bluetooth input version
- The 3.0 TV input is wired through TOSLINK or RCA. The TV Adapter uses a separate Oticon 2.4 GHz hearing-aid link.
No Bluetooth input connection is specified.
Documentation · 2026-11-18 - No coaxial digital input
The red and white RCA pair is analog stereo. The sole digital input in the diagram is optical TOSLINK.
Documentation · 2026-11-18- No HDMI ARC input
The diagram shows optical and analog inputs. There is no HDMI port on TVA3.
Documentation · 2026-11-18- No HDMI eARC input
The diagram shows optical and analog inputs. There is no HDMI port on TVA3.
Documentation · 2026-11-18- Link to hearing aids
- Oticon 2.4 GHz digital radio
The TV connects to the accessory by cable.
Documentation · 2026-11-18 - Accessory-to-hearing-aid range
- 15 m
Up to around 50 feet with a clear line of sight.
Documentation · 2026-11-18 - Analog input details
- Stereo RCA, or 3.5 mm headphone output via the included adapter. Manufacturer reports 10 kΩ input impedance.
Check audio output and volume settings on the source.
Documentation · 2026-11-18 - Optical audio formats
- Digital stereo PCM, Dolby Digital
If the TV sends an invalid digital signal, choose one of these formats on the TV.
Documentation · 2026-11-18 - Optical audio input
- Supported
Accepts stereo PCM and Dolby Digital.
Documentation · 2026-11-18 - Hearing-aid pairing method
- Turn on the adapter and restart the aids. Bring the aids within 30 cm (about one foot), wait 20–60 seconds, and look for two steady blue lights.
See Oticon’s support page for restarting rechargeable aids.
Documentation · 2026-11-18 - Receiver requirements
- Streams directly to the built-in Oticon 2.4 GHz radio in compatible hearing aids.
A separate wearable receiver is not part of the setup.
Documentation · 2026-11-18 - Reconnection behavior
- Hearing aids remember their pairing. Restarting the TV Adapter does not normally require repeating pairing.
Clear all pairings only if needed, then reconnect the desired hearing aids. No precise range-loss recovery latency was specified.
Documentation · 2026-11-18 - Simultaneous listeners
- Oticon documents an unlimited number of paired hearing aids or wearers receiving the same TV audio.Documentation · 2026-11-18
- Simultaneous source connections
- One TV program stream at a time. The inputs are for alternative source wiring, not separate audio mixes.
No supported method to listen to two TV sources at once was documented.
Documentation · 2026-11-18 - Soundbar/receiver setup
- Connect the TV’s optical output to the adapter’s optical input. Connect a second optical cable from the adapter’s optical output to the soundbar or home theater receiver. · With conditions
The other device must accept the TV’s selected optical format.
Setup: Optical TOSLINK connection from the TV to the adapter
Documentation · 2026-11-18 - Stereo streaming
- Supported
Stereo playback uses a pair of hearing aids.
Documentation · 2026-11-18 - Stopping TV streaming
- Change the hearing-aid program to stop hearing TV audio.
The compatible hearing-aid buttons, paired remote or supported Companion controls can select the listening program.
Documentation · 2026-11-18 - TV audio streaming
- SupportedDocumentation · 2026-11-18
- Required TV settings
- Switch the TV’s optical output to stereo PCM or Dolby Digital. For RCA or headphone output, confirm that the TV enables the selected port. · With conditions
Available output options differ by television.
Setup: Compatible Oticon hearing aids paired to the TV Adapter 3.0
Documentation · 2026-11-18 - Independent TV stream volume
- Use the hearing-aid controls or optional remote to adjust TV sound in the hearing aids. · With conditions
Changing this listening volume does not change the TV’s speaker setting. Some variable analog outputs are affected by source volume.
Setup: Compatible Oticon hearing aids paired to the TV Adapter 3.0
Documentation · 2026-11-18 - TV speakers alongside streaming
- Other people can use the TV speakers if the TV keeps them active while feeding the selected audio output. · With conditions
Some headphone connections turn the TV speakers off. Check the TV’s audio-output settings.
Setup: Compatible Oticon hearing aids paired to the TV Adapter 3.0
Documentation · 2026-11-18 - TV/environment balance
- On supported hearing aids, use the Companion surroundings slider or mute the hearing-aid microphones while listening.
The headphone/TV output level and the hearing-aid microphone settings are separate.
Documentation · 2026-11-17
Power and charging
- Power adapter included
- Supported
US box lists a wall power supply.
Documentation · 2026-11-18 - Power connector
- Rear port labeled POWER. Use the supplied power supply.
The exact replacement connector spec for all TVA3 US production runs could not be verified; current 3.1 power specifications apply to 3.1.
Documentation · 2026-11-18
Design and everyday use
- Control accessibility
- The adapter confirms setup with status lights. The hearing aids play a distinct signal when the TV program is selected.
A tactile indicator, spoken prompts or on-device volume controls were not documented.
Documentation · 2026-11-18 - Dimensions
- 124 × 80 × 21 mm in Oticon’s published order.
The manufacturer gives three dimensions but does not name their axes.
Documentation · 2026-11-18 - Included items
- TV Adapter 3.0, Wall power supply, 6.5-foot TOSLINK optical cable, Stereo RCA cable, 3.5 mm to RCA adapter, Instructions for use
The older 168366US manual shows a SCART adapter in the package. The revised technical sheet and 214153US manual list that as a separate accessory.
Documentation · 2026-11-18 - Routine maintenance
- Use a soft, dry cloth. Keep the adapter dry and unplug it to remove power.
Contact the provider if the power-status fault persists.
Documentation · 2026-11-18 - Operating conditions
- 41–104 °F, 15–93% noncondensing humidity, 700–1060 hPa.Documentation · 2026-11-18
- Physical controls
- Rear setup/reset button, Two front status lights, Rear power input, RCA left/right, and optical input and output
Hold setup for more than five seconds to reset all pairings, then re-pair the desired aids.
Documentation · 2026-11-18 - Regional variants
- US guide and technical data identify TVA3, FCC ID 2ACAHTVA3. SCART package contents changed across the observed document revisions.
Check the exact retailer or package label for regional contents.
Documentation · 2026-11-18 - Replacement parts
- Optional SCART-to-RCA adapter
The original accessories list does not supply current separate replacement power-part numbers.
Documentation · 2026-11-18 - Required extras
- Compatible Oticon 2.4 GHz hearing aids, TV or other source with compatible wired audio output, Second optical cable if connecting an additional optical receiver
Optional TV sources with SCART use a SCART-to-RCA adapter acquired separately when absent from the package.
Documentation · 2026-11-18 - Repair and service options
- Contact a hearing care professional if the separate service/fault light persists.Documentation · 2026-11-18
- Status indicators
- Steady blue pair confirmation, Green lights during analog streaming, Green power and blue TV light during optical streaming, Blinking red may indicate an invalid optical signal or a fault
Use the manual’s light chart to identify which indicator is blinking.
Documentation · 2026-11-18 - Storage conditions
- −13–158 °F and 15–93% noncondensing humidity for transport and storage.Documentation · 2026-11-18
- Warranty terms
- The TVA3 manual lists a 12-month limited international warranty from delivery for manufacturing and material defects.
Misuse, unauthorized repairs and associated accessories are excluded. The place of purchase may offer additional coverage.
Documentation · 2026-11-18 - Weight
- 107 g
Adapter only.
Documentation · 2026-11-18
How to set up Oticon TV Adapter 3.0
Connect the supplied power adapter. Run the optical cable from the TV’s optical output to the TV Adapter’s optical input. Choose stereo PCM or Dolby Digital on the TV if needed. Restart your hearing aids and bring them within about a foot of the adapter. Pairing usually takes 20–60 seconds. Two steady blue lights confirm pairing. Choose the TV program on your hearing aids to listen.
What to check before buying
You need a TV with an optical or compatible analog audio output, or suitable external conversion equipment. The adapter sends sound directly to compatible Oticon hearing aids. Your TV controls which speakers and outputs can work together.
Pair the hearing aids and select the TV program
Connect the supplied power adapter. Run the optical cable from the TV’s optical output to the TV Adapter’s optical input. Choose stereo PCM or Dolby Digital on the TV if needed. Restart your hearing aids and bring them within about a foot of the adapter. Pairing usually takes 20–60 seconds. Two steady blue lights confirm pairing. Choose the TV program on your hearing aids to listen.
SourceCheck which TV outputs can work together
You need a TV with an optical or compatible analog audio output, or suitable external conversion equipment. The adapter sends sound directly to compatible Oticon hearing aids. Your TV controls which speakers and outputs can work together.
SourceShares one optical TV output with a soundbar
With the Oticon adapter, one optical cable runs from the TV to the adapter and a second runs from the adapter to the soundbar. That saves a separate soundbar connection. By comparison, the Phonak TV Connector for compatible Phonak hearing aids has no optical output, so the TV or receiver needs another way to feed the soundbar.
SourceLacks Auracast broadcasting
Several people with paired Oticon hearing aids can listen to the same TV program through this adapter. To send TV audio to nearby devices that can receive Auracast, a streamer such as ReSound TV Streamer+ has a broadcast mode. Check which type of connection each listener can use.
SourceCompanion apps
Related accessories
Other devices named in the documentation
These names have not been matched to an exact device in our catalog. They do not create verified matches in the finder.
Checking current offers…
Documentation checked Nov 18, 2026